Vtec solenoid wiring.
 

What is the proper way to wire the vtec solenoid with 1-wire Vtec? I'm using the ac clutch relay line and i've already hex edited my .bin file, and I have the relay set up. I just need to know, do I just run the one wire to the one pin plug on the solenoid? Do I have to do anything with the oil pressure 2 pin plug on the solenoid?

I just saw somewhere that you are supposed to run a wire from the vtec signal and a ground to the oil pressure plug also, that is why I am asking.

Re: Vtec solenoid wiring.
 

power to the solenoid is all you need, the oil pressure switch is only for the ecm