vtec help
 

is it posable to hook the vtec to a toggal switch, and if so how? ???

Re: vtec help
 

Vtec solenoid is operated by 12v. So any 12v source will work. However some ways are more convenient then others. Toggle Switch would work as long as you run 12v through it.

Re: vtec help
 

so what wire is do i hook up to 12v and for the other 2 wires what do i hook them to.

the side plug has 2 wire and the top has 1.

Re: vtec help
 

if ur thinking an on/off switch, keep dreaming unless u like to manually activate vtec on every gear

Re: vtec help
 

its my friend car he lazy and doesnt want to swap ecu and wire harnnes. :-\

Re: vtec help
 

any one

Re: vtec help
 

one to power other one to vtec solenoid done that all

Re: vtec help
 

so the plug onw wire to power and the other wire hooks up to the wire on top of the vtec it self.

Re: vtec help
 

simple..........horn relay :)

Re: vtec help
 

bone stop confusing him yes and it would be smart to run something with a fuse inline

Re: vtec help
 

not trying to confuse him, a buddy of mine wired his up that way!!!!!!!!!!

no fumbling for a toggle switch, it's right under your thumb, hands never leave the steering wheel...........

You do need both hands on the wheel when the MASSIVE VTAK! kicks in!!!!!!!!

Re: vtec help
 

or if you wanna go another way little more complex but better over all although you really should get the right ecu and wiring harness for the proper fuel and timming, you can always get a rpm controller from summit racing for like 50 bucks and then a 12v relay to switch the negitive ground to a positive voltage this way will allow it to turn on automaticaly at what ever rpm you want it to unlike the ther rpm controllers that msd and such provide cheaper and more effiecent worked well for me in my mini me setup well good luck anyway I did do the toggle switch way for about 6 months sucks go with the RPM SWITCH! well enjoy VTACK YO

Re: vtec help
 

can u send a pic of it. what it looks like all hooked up.
we have the msd rpm activator but no instructions on how to hook it up

Re: vtec help
 

sorry I don't have pics I swaped out for a ls/vtec instead a while back with the proper harness and ecu it's probably pretty easy with the msd setup just find a rpm signal I used the blue wire on my dizzy and splice into that for the rpm signal then just need your postive and negative to run the controler all thats left is to plug the activated positive signal into the vtec solinoide thats if msd uses a postive signal for the switch. thing that I thought sucks about the msd setups is to setup different rpm's you have to go out and buy a pill for the rpm you want. ohh and if it is designed for a v8 devide the rpm by half. good luck sorry I don't have pics if you search the web for the little crx that could or something like that there is a page on how to wire them in super easy.

Re: vtec help
 

Click here for Msd directions http://www.msdignition.com/pdf/8969_frm25515.pdf

Re: vtec help
 

what i dont get is we hooked the white wire to the tach, and the tach stoped working.

Re: vtec help
 

Did you hook the white wire to the Blue Dis wire?

Re: vtec help
 

yes