HomemadeTurbo - DIY Turbo Forum
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Hybrid/Tech (https://www.homemadeturbo.com/hybrid-tech-8/)
-   -   Vitara piston installation Info (https://www.homemadeturbo.com/hybrid-tech-8/vitara-piston-installation-info-96973/)

CXyD 11-10-2008 12:34 AM
Re: Vitara piston installation Info
 
According to FJT : https://www.homemadeturbo.com/forum/...?topic=95223.0 Arrow towards the timing belt.
If you use 75.5mm bore pistons run 0.003 to 0.0035 pist. to wall clearance and you'll have low amount of piston slap.

SDRAWKCAB 11-10-2008 12:44 AM
Re: Vitara piston installation Info
 
Originally Posted by 92CXyD
According to FJT : https://www.homemadeturbo.com/forum/...?topic=95223.0 Arrow towards the timing belt.
If you use 75.5mm bore pistons run 0.003 to 0.0035 pist. to wall clearance and you'll have low amount of piston slap.
According to the vitara manual you are supposed to face the pistons toward the left of the motor if the exhaust is facing you.
I built my motor this way and it will be running very shorty.
Im just stating my Educated opinion By showing information which I have found.


All times are GMT -5. The time now is 03:40 AM.
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands