HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Hybrid/Tech (https://www.homemadeturbo.com/hybrid-tech-8/)
-   -   vacume (https://www.homemadeturbo.com/hybrid-tech-8/vacume-68470/)

MiroslavB 10-13-2006 05:28 PM

vacume
 
i have a 92 vx witha z6 swap and a dsm t25 hmt kit on there and its not tuned. the problem is my vacume only sucks up to 7 to 8 when not gunning it and even when i gun it and let go it should drop lower but it doesnt so i have no clue what is going on what could be the problem???

Tom-Guy 10-13-2006 10:45 PM

Re: vacume
 
Vacuum leak, toasted valve/headgasket/engine, broken boost gauge. I dunno? How does it run?

Slo_crx1 10-13-2006 11:30 PM

Re: vacume
 

Originally Posted by Joseph Davis
Vacuum leak, toasted valve/headgasket/engine, broken boost gauge. I dunno? How does it run?

Add wrong cam timing to the list as well, or big aftermarket cam.

0b00st0 10-13-2006 11:31 PM

Re: vacume
 

Kinked line too.




MiroslavB 10-14-2006 12:27 AM

Re: vacume
 
runs fine just vacume only goes down to 8 and thats that

salesmonkey 10-18-2006 06:47 AM

Re: vacume
 
whats the signs of a toasted valve? if any besides low vac

Tom-Guy 10-18-2006 07:24 AM

Re: vacume
 
Rough idle, dead or dead-ish cylinder.

Sounds like a kinked/cracked line, or bad gauge if everything runs tits.

MiroslavB 10-18-2006 02:17 PM

Re: vacume
 

Originally Posted by Joseph Davis
Rough idle, dead or dead-ish cylinder.

Sounds like a kinked/cracked line, or bad gauge if everything runs tits.

i mean everything is fine its just that its not tuned so could that be the problem??? and when the turbo setup wasnt in i already had the boost gauge put in and the vacume was fine so i dont knwo maybe tune???


All times are GMT -5. The time now is 05:37 AM.


© 2024 MH Sub I, LLC dba Internet Brands