HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Hybrid/Tech (https://www.homemadeturbo.com/hybrid-tech-8/)
-   -   v-teck HEELP (https://www.homemadeturbo.com/hybrid-tech-8/v-teck-heelp-17959/)

cjaraujo 03-26-2004 08:37 PM

v-teck HEELP
 
Hello there , does is the v-teck wire is hot all the time i test it with a small red ligth and one wire i ground it and the other i hook it up on the v-teck when i turn the ignition on the ligth is on so i'm not sure if it's normal or not hellp me please the ligth shooud be off and them when hits 6000rpm goes on rigth

turboboy 03-26-2004 08:38 PM

Re:v-teck HEELP
 
vtec ;)....and your vtec should not be on all the time

Honda16hb 03-26-2004 08:42 PM

Re:v-teck HEELP
 
this better not be doc again, we have real problems to solve without his intervention.

my vtec is at 5.8, not 6.

cjaraujo 03-26-2004 08:56 PM

Re:v-teck HEELP
 
please i need help do not make a mess in here talking about single and dual can please i have a huge problem i need heeellllp

Dr.Boost 03-26-2004 08:57 PM

Re:v-teck HEELP
 

Originally Posted by kyle
this better not be doc again, we have real problems to solve without his intervention.

my vtec is at 5.8, not 6.

WTF are you talking about?

Like you are trying to solve problems anyways. You have posted like 345 times today.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

traff1c 03-26-2004 09:00 PM

Re:v-teck HEELP
 
Just cut the VTEC wire going to your solenoid..... apparently you are not smart enough to reap the benefits from a "vteck" engine....

cjaraujo 03-26-2004 09:03 PM

Re:v-teck HEELP
 
---- I SAYD NO ---- IN HERE I NEED HELLP ---- OFFF HELP ME DON'T MESS IT

cjaraujo 03-26-2004 09:04 PM

Re:v-teck HEELP
 
i want it working no not working ok

turboboy 03-26-2004 09:04 PM

Re:v-teck HEELP
 
well does the car run right (can you hear it change over?)...maybe you have the wrong wire, maybe the pressure one?

cjaraujo 03-26-2004 09:09 PM

Re:v-teck HEELP
 
the car is fine but i don't feel it or hear it

turboboy 03-26-2004 09:12 PM

Re:v-teck HEELP
 
is it a sohc?...you most likely wont hear it loudly. if youre vtec was on all the time i imagine the car would just bog down off the line

cjaraujo 03-26-2004 09:17 PM

Re:v-teck HEELP
 
my friend has a 2003 single can and i feel it MY IS A D15JDM AND I DON'T FEEL IT

Dr.Boost 03-26-2004 09:21 PM

Re:v-teck HEELP
 
Dude, it's not like you're going to snap a ------- axle from too much power when "Vteck" kicks in. Jesus...... ::)
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

turboboy 03-26-2004 09:22 PM

Re:v-teck HEELP
 
not to be an ass, but its "cam"...and dont sweat it, you wont really feel a pronounced difference when it switches over, it just will feel like it came into the power band

traff1c 03-26-2004 09:23 PM

Re:v-teck HEELP
 
Im trying to help you you fucktard.... if you dont know what the ---- you are doing... why are you ------- with wires trying to find the Vtec power source.... if you say the light turns on when you start the car odviously its not the right one..... now put everything back the way it was before you hacked it up and buy the repair manual and do it right... and on a single "can" vtec doesnt kick in that hard... like a DOHC does....

WhiteZC 03-26-2004 09:32 PM

Re:v-teck HEELP
 
Posted by: Dr.Boost Posted on: Today at 07:21:15pm
Dude, it's not like you're going to snap a ------- axle from too much power when "Vteck" kicks in. Jesus......

-----lol nice way to put it

Posted by: -------- Posted on: Today at 07:23:57pm
Im trying to help you you fucktard.... if you dont know what the ---- you are doing... why are you ------- with wires trying to find the Vtec power source.... if you say the light turns on when you start the car odviously its not the right one..... now put everything back the way it was before you hacked it up and buy the repair manual and do it right... and on a single "can" vtec doesnt kick in that hard... like a DOHC does....

----- LOL..LMAO

cjaraujo 03-26-2004 09:33 PM

Re:v-teck HEELP
 
hey getto the wire its on the same place so don't tell me to cut it or leave it alone ok

Honda16hb 03-26-2004 09:53 PM

Re:v-teck HEELP
 
cut the wire, then cut your balls. and if you want to hear vtec cut off your muffler, then cut your throat

Ravage70 03-26-2004 11:24 PM

Re:v-teck HEELP
 
crazy posting tonight, especially with fez over here and the fucked up english which make sense no me kookoo big vteck kick no ground cut wire no?

MikeJ-2009 03-27-2004 12:04 AM

Re:v-teck HEELP
 
IE LUB MI VTEKC SINKLE CAN

Donald125 03-27-2004 02:46 AM

Re:v-teck HEELP
 
unplug it take it for a redline run and you will know if it`s working or not.

calvinPGMFI 03-29-2004 02:29 AM

Re:v-teck HEELP
 
V-TECh => phone
VTEC=> Honda VTEC
but i neverheard of v-teck
Calvin

Slo_crx1 03-29-2004 02:19 PM

Re:v-teck HEELP
 
Ummm, yeah :-\ At least i'm not the only one who doesn't understand a damn thing he's saying ::)

SpeedyJAY 03-29-2004 06:56 PM

Re:v-teck HEELP
 
This is a joke right ?

I mean seriously this is a joke?

Or are there really people like you in this world?

WhiteZC 03-29-2004 07:07 PM

Re:v-teck HEELP
 
no...there are people like us in the world. we try and help others like you. but when someone doesnt have common sense to hook something up, then they shouldnt be told how to benefit from it...

read up on that, it might help.

https://www.homemadeturbo.com/forum/...threadid=14497

TurboNX2000 03-29-2004 07:14 PM

Re:v-teck HEELP
 
me dont uindastand v tack me no ground wire vteck no getto, in other words go get a damn english book and dont get mad when people are trying to help you-stupid crack head ::) ;D

jake2001z001 03-29-2004 07:14 PM

Re:v-teck HEELP
 
All i gotta say is thanks for this thread. all of you have made my night. ;) :) :D

HMT-Admin 03-29-2004 08:49 PM

Re:v-teck HEELP
 
Hey I think we should rag on everybody on hmt just because they dont know what they are doing, and because they dont know how to spell

>:(


All times are GMT -5. The time now is 05:19 AM.


© 2024 MH Sub I, LLC dba Internet Brands