Upgrading brakes of my ED7
well somebody knows i got an EF (EDM) , it has bended discs, iwas thinking about to runing with ITR calipers i can get, with 11 (maybe 12"?)....i was researching some info about this , found some topics about this but what i want is runing with all stock (means Knuckles....etc.) so i need this :
1/8" wheel spacer ITR calipers /legend (23T brackets i can get) Discs 11 or maybe 12 inchs (i was thinking in getting Power Slot Big brakes). What do you think? i think can run good but not sure in all.. calipers bolt paresnt are the same than ED7 capilers? P.S. I assume 15inch or 16 for 12 inch is minimun wheels i should be running. |
Re: Upgrading brakes of my ED7
The SiR EF's have a 10" disc and a large caliper, I'd personally go with that setup. Just make sure to get the entire spindle with the hub and everything and bolt it on and go. I just did a DA integra spindle and brake swap on my ED6, but I haven't driven it yet to see how it feels...need to get it aligned first. You really shouldn't need anything larger than that in an ED chassis unless you're doing some major autocross type of driving. Then I could see wanting 11" brake setup. Check out www.fastbrakes.com if you want an 11" rotor setup on the cheap. They make an adapter that uses a 11" VW corrado rotor and a DA integra caliper and mount bracket that bolts on to your stock ED spindles.
|
Re: Upgrading brakes of my ED7
ill mail them . thx. ill use that car for tracks (not drags)
|
Re: Upgrading brakes of my ED7
just doing the rear disc conversion FTW!
|
Re: Upgrading brakes of my ED7
Originally Posted by cloud
just doing the rear disc conversion FTW!
|
Re: Upgrading brakes of my ED7
meanwhile get some Hawk HP-Plus pads
|
Re: Upgrading brakes of my ED7
Metal masters :)
|
Re: Upgrading brakes of my ED7
i had AEM pads already (for 92-95 civic, i think both use the same pads).. for rear pads..ill buy stock :8, im saving money for to get runing with 11inch rotos with DA calipers O0
|
Re: Upgrading brakes of my ED7
trust me, none of the metal master nor aem can compare to HP+
|
Re: Upgrading brakes of my ED7
To add to your awesome brake setup, get a 15/16's master cylinder too Walter. I'm noticing that my DA calipers have a little more pedal travel than I want with the 7/8's master I put on there to replace my worn out 15/16's.
|
Re: Upgrading brakes of my ED7
Originally Posted by slo_crx1
The SiR EF's have a 10" disc and a large caliper, I'd personally go with that setup. Just make sure to get the entire spindle with the hub and everything and bolt it on and go. I just did a DA integra spindle and brake swap on my ED6, but I haven't driven it yet to see how it feels...need to get it aligned first. You really shouldn't need anything larger than that in an ED chassis unless you're doing some major autocross type of driving. Then I could see wanting 11" brake setup. Check out www.fastbrakes.com if you want an 11" rotor setup on the cheap. They make an adapter that uses a 11" VW corrado rotor and a DA integra caliper and mount bracket that bolts on to your stock ED spindles.
|
Re: Upgrading brakes of my ED7
Did you car come with 240 or 262mm rotors? 240mm rotor cars can use the 262mm car calipers with the 280mm rotors from the Corrado and our adapter kit. If the car came with 262mm rotors then you have to use the ITR calipers with our 282mm rotors. |
Re: Upgrading brakes of my ED7
i have full ls brakes in my 90 crx with the da 1inch master and 290 booster and it stopes on a dime
|
Re: Upgrading brakes of my ED7
Originally Posted by turbohf
im pretty sure there kits use a redrilled Prelude rotor, i really dont see how the ---- your gonna get a Corrado rotor to work with honda calipers... im 99% sure there are kits to use the Corrado rotors, not doubting that, its just that they use Willwood calipers in those kits...
|
Re: Upgrading brakes of my ED7
i was trying to use Power SLot big brake kit 92-95 civic for my EF..but i asked them (powerslot ) , they dont make one kit for EF .. i was wondering if i can use adapter brakefast with those rotos.. lugs are the same..
|
Re: Upgrading brakes of my ED7
Originally Posted by Walter
i was trying to use Power SLot big brake kit 92-95 civic for my EF..but i asked them (powerslot ) , they dont make one kit for EF .. i was wondering if i can use adapter brakefast with those rotos.. lugs are the same..
|
Re: Upgrading brakes of my ED7
well those powerslot rotos come with that backspacing i think.. look:
http://www.modacar.com/Merchant2/gra...e_bigbrake.jpg |
Re: Upgrading brakes of my ED7
Originally Posted by Walter
well those powerslot rotos come with that backspacing i think.. look:
http://www.modacar.com/Merchant2/gra...e_bigbrake.jpg |
Re: Upgrading brakes of my ED7
are them corrado rotos? ¿? they are slotted 302mm or so.. it would be great the Big Brake Kit Power Slot for 92-95 civic will fit on my ED7 :-\
|
Re: Upgrading brakes of my ED7
Originally Posted by Walter
are them corrado rotos? ¿? they are slotted 302mm or so.. it would be great the Big Brake Kit Power Slot for 92-95 civic will fit on my ED7 :-\
|
Re: Upgrading brakes of my ED7
powerslot doesnt make 88-91 big brake rotos :-\ so, power slot make Big Brake kits for Corrado that fit on my car, thats what youre meaning? :P
|
All times are GMT -5. The time now is 11:24 PM. |
© 2024 MH Sub I, LLC dba Internet Brands