turbo size...
03-09-2008, 04:11 AM
#5
1.0 BAR
Thread Starter
Join Date: Feb 2006
Posts: 275
Re: turbo size...
Originally Posted by N/A mike
i think you should figure out what engine you want before you figure out what turbo you will be putting on the motor you don't have 
NA... C the problem is i have the b16a2 in my hatch at the moment and the b18b head is waiting for some dual springs with titanium retainers for my stage 3 CC.
so i wouldnt mind to have both of them turboed..
03-09-2008, 01:26 PM
#9
0.0 BAR
Join Date: Jan 2008
Posts: 0
Re: turbo size...
Originally Posted by Morphina
NA... C the problem is i have the b16a2 in my hatch at the moment and the b18b head is waiting for some dual springs with titanium retainers for my stage 3 CC.
so i wouldnt mind to have both of them turboed..
Btw, you posted in the wrong section.
03-09-2008, 09:52 PM
#10
1.0 BAR
Thread Starter
Join Date: Feb 2006
Posts: 275
Re: turbo size...
Originally Posted by Teg2Boo
Turboed a b16a2 that goes to 8500rpm is not the same that turboed a b18b that goes to 7000ish rpm! On the other hand, the b18 have more displacement so if install the same turbo on both engine, the one on the b18 will it full boost faster than b16... Look at the Turbo Projects section or Member setup in the stickies in Force Induction section. Too many variables to give an good answer...
Btw, you posted in the wrong section.
Btw, you posted in the wrong section.
Originally Posted by N/A mike
well that makes sense.
i don't know what turbo for those motors though.
i've heard that it depends on what your goals are.
i don't know what turbo for those motors though.
i've heard that it depends on what your goals are.
