Turbo Problem
 

hi I instaled a t3 super 60 on my d16z6 with 450 cc injectors and bov and intercooler everything necessary i use uberdata as a management and when i start my car the car runs ok then i give gas and the boost goes up to 8 psi (normal) but seems like my rpm stays at 2500-3000 dosent go more than that and the turbo does boost i use a resistor box to control my injectors ive tried a couple things but now i realy dont know what to do :(

Re: Turbo Problem
 

sure you dont have some really low rev-limit? will it rev higher in neutral?...more details

Re: Turbo Problem
 

i dont think so because there is no cut off it just stop at a certain rpm and no in neutral it does the same thing

Re: Turbo Problem
 

try burning a new chip? do you have launch control? if so is your speedo working?

Re: Turbo Problem
 

ive tried to burn like 5 chips some work better than other but still doesent do nothing and i dont think i have that lauch thing what else could it be looks like the car is realy rich

Re: Turbo Problem
 

check engine light sounds like the ecu is in limp mode

Re: Turbo Problem
 

ok thats what a couple people told me on different forums now how do i fix limp mode ?????

Re: Turbo Problem
 

what cel code are you getting?

Re: Turbo Problem
 

theres no code and now the car wont start the starter works but it wont start theres oil theres fire what can the probleme be ?????????

Re: Turbo Problem
 

bumpo need help