ericg_0059

I have a 89 Si with a 5-speed tranny, I also have a Sohc Hydraulic tranny, Can I take everything out of the Hydro and put in my cable housing. I have heard of this before on b-series engines, but I thought I would ask. Thanks

HMT-Admin

It would be a huge pain in the ***. New clutch linkage, master cylinder, all the lines. Then you would have to fabricate 3 mounts, because None of them will work.

Jeff

ericg_0059

no no, I meant take maybe the synchros out or the gears themselves, not convert my cable to a hydraulic. The tranny I got has a X4 stamp on it and then on the sticker with the bar code it says S20-lots of numbers.

I just wanna know if I can pull the guts out and put it in the other tranny housing.

HMT-Admin

----, thats what I get for not reading the entire post

Sorry bout that,

Actually you cant swap shafts and syncros from Hydro to cable on B-series trannys. We have taking them apart and checked it out. Its alot differnt.

But as far as D-series trannys, The L3 trannys and the S20's. I have heard rummors that you can, but I am not 100% positive you can.

Jeff

ericg_0059

Thanks, I think I might just go and try it one of these days. And what exactly is an S20 tranny? Like what car did it come out of? And is it low geared or mid or high?

Thanks again

HMT-Admin

The S20/P20 is from the 5g Civic si/ex. The gears are pretty similar to a l3 D16a6 si tranny..

Jeff