kswift

ok well i have a d16z6 motor and tranny i put a new clutch in it with my friend a week ago and everything is back together but i havwe one problem when i press my clutch theres very little pressure and it goes to the floor and will stay there unless i pull it up i have bleed the system and it hasnt gotten any better but there is pressure on the fork to the pressure plate becasue when i push the clutch pedal down it will move the fork a very little. please help i have no idea whats up with this problem thanks

B00M3R

Bleed it again. had that same problem with my swap when i got it in. bleed it once and it wasnt enough, fill up the resovoure and bleed it down again.

kswift

ok thanks for the help ill give it another shot see what happens

LSD Motorsports

definately the bleeding issue man, dont let the reservoir empty and get a bottle of break fluid, when ur bleeding it, submerge the hose under the fluid.