Re: tosted a b17 piston ??? options ??
 

anyone know if you can run ls pistons in a b17 ith b17 rods ... should be ok cause b16 dh is .020 and the ls's is .030 which is less which will give you about 8.8 c./r. im just wondering if the wrist pin is in the right location on the ls pistons

Re: tosted a b17 piston ??? options ??
 

nm i found the answer 8) http://www.ff-squad.com/tech/temp/pistons.htm

Re: tosted a b17 piston ??? options ??
 

Attachment 17735
http://i74.photobucket.com/albums/i2...rojects031.jpg
http://i74.photobucket.com/albums/i2...rojects032.jpg


wierd thing was no sign of detonation but i wasn't in it when it blew so who knows ...
compression reulsts are
150 150 0 150 :P

Re: tosted a b17 piston ??? options ??
 

i already found that i think that guy is a dumb ass though

Re: tosted a b17 piston ??? options ??
 

pretty simple take the piston off if you guys have a press if not run down to the machine shop and heat the rod up get the new piston in


Throw it in and see if your even with the deck shouldnt cost more than 15 bucks for them to press of a piston and time to see if your even with the deck.

Re: tosted a b17 piston ??? options ??
 

i think were just going to do it im going to measure the wrist pin hiegth with a micro meter the should according to the info i found and should make the compression 8.8:1 which is perfect for a gm8 @ 15 psi

Re: tosted a b17 piston ??? options ??
 

lol you dont have a micro meter. but i'll bring mine over

Re: tosted a b17 piston ??? options ??
 

lol im sorry the guy across the alley has one (scott) ... retard :1 plus i already found out that they will work

Re: tosted a b17 piston ??? options ??
 

the 40 year old vergin who adopts ------z

Re: tosted a b17 piston ??? options ??
 

se :8