toga pumps and bearings
 

man im typing my ass off this morning!
anyone use these?
lemme know cuz im sick and tired of having spun bearings on good motors
jman

Re:toga pumps and bearings
 

ooh.. ok.. now that i know "why" you want different bearings. The toga bearing will still "spin". An OEM Honda bearing is what is commonly used. They get spun because of incorrect clearences. (too tight). whenever you re-build a motor you should ALWAYS check the clearences. either using those special micrometers or plastigauge.

If the bearing was untouched from the factory it could be a result of low oil. Also, the d16y"X" series engines are notorious for bad oil pumps.

Re:toga pumps and bearings
 

ok
so use OEM bearings and go with the high volume toga pump?
jman

Re:toga pumps and bearings
 

i would so some more research on the pump.. like google search it, find people that have used it etc.

but oem bearings should not be a problem as long as the proper clearences are kept.

Re:toga pumps and bearings
 

man...what other forums give a response that fast?
NONE!!!
ok ill research it more...but they do have a 36/36 warranty on them and good flow rates
anyone else in here use them at all?
jman

Re:toga pumps and bearings
 

careful w/ warrenties. Usually they're voided as soon as your car see's a track.

Re:toga pumps and bearings
 

i know and they know
i just talked to them
as long as its not a stripped drag car im fine
and the pump is only 97 bucks shipped
all im saying is if they warranty it all, it must be good ----
jman

Re:toga pumps and bearings
 

OBD2 oil pumps are gay, this is what you do, just buy a new one every 30k miles ;)

who knows how good toga pumps even are... :-\

Re:toga pumps and bearings
 

I can take a crap in a box and slap a warrenty on it, but that doesn't mean ----. see who uses that oil pump before you buy yourself one.

Re:toga pumps and bearings
 

nice tommy boy plug (the oil filters)...but the warranty helps me feel warm and fuzzy
lol
ok ill check around more
thats why i posted it here...to see if yall were using them
lemme know
jman

Re:toga pumps and bearings
 

I did a google search on it and a few people are using them. what's the website where you found it for $97 shipped? that's a good price, I might have to use that ---- on my built lsv.

Re:toga pumps and bearings
 

sorry its 129 for the pump
heres the site (nice site btw)
http://www.importperformanceparts.net/
you have to go under "honda" then select "oil pump"
again nice ass site
jman

Re:toga pumps and bearings
 

genuine itr pump for 108.90

http://inlinefour.com/intypoilpum.html

Re:toga pumps and bearings
 

he has a d16 ;)

Re:toga pumps and bearings
 

so much for that. and who the hell said that d-series parts are cheaper?

Re:toga pumps and bearings
 

some parts are; some arent
like a complete bottom end with 50k on it for 150
150 want even get you a single rod in a B-series
lol
jman

Re:toga pumps and bearings
 

I bought my LS block for $80. no pistons or rods, but I'm building it anyways.

Re:toga pumps and bearings
 

that was a complete block for 150 shipped for my d
lol
i have love for the b series too
only if it came in the car that you have (integra)
not a fan of swaps (good potentional there already)

jman