Throttle Body
02-08-2005, 11:15 AM
#1
3.0 BAR
Thread Starter
Join Date: Sep 2003
Posts: 3,751
Throttle Body
Does a B-Series or F-series thottle body fit onto a ZC intake as long as it does not have the MAP sensor on it?
I know the zc uses a 55mm and b18 use 58-60(ls only) and F22 use a 60.
These are easy to come by a the junkyard (*cough* toolbox special *cough*)
So I though what the hey.
I know the zc uses a 55mm and b18 use 58-60(ls only) and F22 use a 60.
These are easy to come by a the junkyard (*cough* toolbox special *cough*)
So I though what the hey.
02-08-2005, 06:19 PM
#3
0.0 BAR
Join Date: Dec 2002
Posts: 0
Re:Throttle Body
ditto 88-91 run a bolt pattern all alone only way to get a bigger throttle body is to get a bored throttle body cough and f series throttle bodies are 56 mm no matter what people want to tell you. They also run a different style shaft that is about 10 mm longer and run a different style throttle rotor then the standard b/d/h throttle bodies
Thread
Thread Starter
Forum
Replies
Last Post
Scottsi
General Discussion
6
05-23-2004 07:44 PM
