i just finished putting in a f22a6 block in place of a f22a4. its an 1991 auto accord btw all the sensors stayed the same. i only swapped the longblock. so anyway, no cel, and no fuel. i pulled the relay, soldered it, and it still didnt work. so the owner of the car bought a new relay outrite, but still no spark or fuel. i've checked all the fuses... any ideas?

 

groundssssssssssssssssssssssssss

 

yeah yeah yeah, but wouldnt the fuel still get pushed through?

 

Is the fuel pump priming? Which relay did you replace?

 

when u have a ground wire not "connecting" somewhere you put the key in, dash lights up but no crank/fuel. And the fuel pump wont prime eiher.
Check the ground wire near the thermostat in the clusterfuck of wires, its usually the one people forget

 

im having the saem issue, but we've checked everything minus the ecu, so im getting another 1 prolly monday, you should check that too.

 

it cranks, just no spark of fuel. the pump is not priming at all. i replaced the main relay

 

Yeah mine cranks too, but the car isnt getting signal.

 

fuse?

 

i checked and rechecked fuses. i've yet to recheck the grounds though, so ill do that and let y'all know whats up. thanks for tips dudes.