Anubis_4_99

i've only had one before and it was a draw through

i have a new car, im about to buy the turbo, IC, bov, and WG

but i need to know if i can go blow thru and how i would do it. would i just create like a box over the carb and basicly have the intake be the intake on the turbo?

i dont really want to go draw thru again and i dont really have the room to do it in this car

Anubis_4_99

someones gotta know somethin if im bein to vauge on anything tell me

SDRAWKCAB

you need a blow thru carb hold on ill find one.

SDRAWKCAB

http://www.jegs.com/webapp/wcs/store...0002_459986_-1
FOUND ONE!
Its what im going with on my 1982 v8 turbo regal project.

Anubis_4_99

fuuuuuuuuuuuuck

for that much i might as well wait and swap it to EFI, i've got acess to all the parts, just cant afford the downtime

SDRAWKCAB

http://www.hangar18fabrication.com/blowthru.html
or you can do this?

Anubis_4_99

modding the carb would take too much time for me, i'll probably just swap it to EFI one weekend, im lookin at a beater prelude so i might be able to afford a little downtime soon

SmellySOHC

whats the carb car u have now?

Anubis_4_99

88 corolla, 4AF motor

caged

iv done a few draw through and a few blow through. On a buget a draw through will work way better. You can just box the carby and run a rising rate fuel reg with an efi pump.