tach no work, help please
so my tach worked off and on when I was trying to get my ---- running with the turbo, now it doesn't work at all. I hooked up my old sunpro right at the big blue wire coming off the distributor and it didn't work either, just sat at 0 (yes, I'm 100% sure it was hooked up right and the car was running). what could be the problem? I replaced the module with one from my p06 distributor (obd1 nonvtec d) and the car runs fine, but still no tach. any suggestions?
|
Re:tach no work, help please
i believe the coil is responsible for the tach output.. did u replace that or the ign module?
|
Re:tach no work, help please
I would check the ignitor which is internal of the dist, had a car the other week did the exact same thing and that fixed it.
|
Re:tach no work, help please
I replaced the module, that little thing that 4 wires attach to. I'll try the coil today if I have time, thanks for the input, I'll see how it goes.
*edit* just replaced the coil, it still doesn't work, any other ideas? |
Re:tach no work, help please
a new tach perhaps? ;)
|
Re:tach no work, help please
I would say it has something to do with your wiring.....somehow....someway. I've got a hunch. ;)
__________________ Best Car Insurance | Auto Protection Today | FREE Trade-In Quote |
Re:tach no work, help please
Originally Posted by Dr.Boost
I would say it has something to do with your wiring.....somehow....someway. I've got a hunch. ;)
and spenser, if 2 tachs don't work a third one isn't going to work either. |
Re:tach no work, help please
hook the signal wire from the tack to the inside "-" on the coil inside the dizzy.
|
Re:tach no work, help please
Originally Posted by mycrx
hook the signal wire from the tack to the inside "-" on the coil inside the dizzy.
|
Re:tach no work, help please
Originally Posted by AbaZ
Originally Posted by mycrx
hook the signal wire from the tack to the inside "-" on the coil inside the dizzy.
|
All times are GMT -5. The time now is 02:47 AM. |
© 2024 MH Sub I, LLC dba Internet Brands