Summit Rpm Activator switch... No work.. HELP!! 12:14 AM 6/18/2003

Reply Subscribe

Thread Tools

Search this Thread

Jun 18, 2003 | 06:08 AM

Sirex

Thread Starter

1.0 BAR

Joined: Dec 2002

Posts: 387

Summit Rpm Activator switch... No work.. HELP!! 12:14 AM 6/18/2003

well, its powered right because the red light comes on it.. the ground is fine else the red light wouldnt come on.. im using the 30 amp relay.. i have the vtec wire connected fine.. the rpm signal is the - on the distributor... i have the switches set at 2400 so it can activate at 4800... i have all the power and grounds fine.. and relay but it seems like its not picking up the signal from the distributor... my vtec does work cuz i had an MSD that worked and a vafc that worked.. and i threw a direct 12v to the vtec selenoid and it works... what could be wrong?

Jun 18, 2003 | 07:06 AM

ShadowRex

1.0 BAR

Joined: May 2003

Posts: 517

Re:Summit Rpm Activator switch... No work.. HELP!! 12:14 AM 6/18/2003

The summit rpm switch runs off a GROUND. it has constant power and activates off of a ground.

Jun 18, 2003 | 01:22 PM

Sirex

Thread Starter

1.0 BAR

Joined: Dec 2002

Posts: 387

Re:Summit Rpm Activator switch... No work.. HELP!! 12:14 AM 6/18/2003

i dont get it.

Jun 18, 2003 | 02:51 PM

Turbo90Accord4DR

Guest

Posts: n/a

Re:Summit Rpm Activator switch... No work.. HELP!! 12:14 AM 6/18/2003

ok, the wire that comes from the switch is a ground( so when you hit 4800 rpms the ground signal is sent) so you need a constant 12V positive source going to the relay, and the negative someing from the box...