Sum weird shit?????????
Ok i took my intake mani off to drill some new holes in the back of it and installed some nipples for extra vaccum...
cleaned it up.... installed a new gasket and all..... everythings hooked up....FP is good....but it doesnt start.... itll catch for a sec but then nothing.... iunno if i couldve possible routed the water lines for the fast idle thingy and the iacv wrong...... Im clueless??? anything? oh and the thermostat ground is good.....never took it off |
Re: Sum weird shit?????????
it was the plugs
|
Re: Sum weird shit?????????
weird
|
Re: Sum weird shit?????????
thats what happens with hondas ( weird ----) today i cleaned my car out took my ecu from laying down to siting upright then my cel came on started runing lean i unpluged everything pluged it back in and it was all fine again figures right
|
Re: Sum weird shit?????????
well now my ---- gets hot
I have one those aluminum radiators and it steams really ------ bad..... just from driving for 10 15 min... my coolant sensor is new and it says its normal temp But when i get facing down my driveway itll die till im on level ground again??? I have a full tank Brand new 255 pump... Im starting to think i ran the coolant lines on the iacv and fast idle wrong or sumthin... I need diagrm for them |
Re: Sum weird shit?????????
Dammit it was that cheap ass FPR i got off ebay
runs good now |
Re: Sum weird shit?????????
stock FPR FTW.
|
Re: Sum weird shit?????????
Unno the fucked up ----.....
Im runnin perfect A\F under boost...all the way to 5th 12psi..... go home...drink a little...get bored...decide to clean my fuel filter out.... When I take my fuel filter out....brown ---- comes runnin out... So i buy a new one..put it in....then get on the road ....and then I run lean everytime i start boostin..... WTF Is it me or is there a ghost ------ my ---- up? maybe my 450's are too small and since i got allot fuel goin in there the injectors are shittin |
Re: Sum weird shit?????????
that is weird
|
Re: Sum weird shit?????????
It says my injectors are at 95% duty cyle at 12psi...7000k
anything over 80% is bad right? Are 450's good over 10psi? |
All times are GMT -5. The time now is 06:11 PM. |
© 2024 MH Sub I, LLC dba Internet Brands