HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Hybrid/Tech (https://www.homemadeturbo.com/hybrid-tech-8/)
-   -   something weird with my brakes.... (https://www.homemadeturbo.com/hybrid-tech-8/something-weird-my-brakes-77475/)

jdm.ejone 05-06-2007 09:09 PM

something weird with my brakes....
 
whenever i made a complete left turn (cant turn steering wheel anymore), and then i straighten the wheel, my brakes go to the floor and i have to pump the brake for them to come back... almost like they need to be bled..

whenever i turn right or just drive or anything they are perfect. it only happens on sharp left turn and i dont understand why.

i have bled my brakes (RL,FL,RR,FR) and that didnt help, i thought that my brake line might be pinched because i just lowered with about 2 in all the way around and i looked and nothing... they still do it.

like i said, i just lowered it and it never did this until then so i have no idea what else it could be. i dont think my master cylinder would be out but thats a possibility i guess...

any advice anyone thanks!!

BTW its a 97 coupe ex if that matters...

ifly87 05-06-2007 09:51 PM

Re: something weird with my brakes....
 
could be a pinhole in one of the rubber lines that opens up when you crank it?? that is really wierd thats all I could think of.

Edit: park in you're neighbors clean driveway, crank the wheel all the way to the stop and push the brakes in a few times, then look to see where its leaking maybe?

accordepicenter 05-06-2007 10:00 PM

Re: something weird with my brakes....
 
check your fluid level, if its full id say its your master cyl

TinyTubs 05-07-2007 02:14 AM

Re: something weird with my brakes....
 
Only on left turns though?

That part makes ZERO sence

Bone1 05-07-2007 02:32 AM

Re: something weird with my brakes....
 
dead wheel bearing or the axle nut was left loose, killing the wheel bearing.

spoonfedcrx 05-08-2007 07:45 PM

Re: something weird with my brakes....
 
^^^What?!? Replace your master cylinder you'll be fine.


All times are GMT -5. The time now is 02:26 AM.


© 2024 MH Sub I, LLC dba Internet Brands