Someone with a fuel pressure gauge, do me a favor
 

Tell me when you turn the key to 'on' to prime the pump, where does the needle go to.

and when you turn OFF the car, where does it come to rest?

Re: Someone with a fuel pressure gauge, do me a favor
 

Not all cars are the same ;) Whats urs doing?

Re: Someone with a fuel pressure gauge, do me a favor
 

Durr

Someone with a B-series, Prefferably a B18a/b motor.



running at 100+PSI at the filter.

I wanna verify the gauge is good without replacing it with another cause noone has a spare in my area. Just did a B+M Adjustable FPR install and suspect I did something wrong, just kinda wanna verify it.

Re: Someone with a fuel pressure gauge, do me a favor
 

There is your problem.

Re: Someone with a fuel pressure gauge, do me a favor
 

how about you put your stock FPR back on and quit being a ricer. :1

Re: Someone with a fuel pressure gauge, do me a favor
 

B+M Uses the stocker, its a modifier, and its known as a good unit typically. so the stocker IS now the B+M unit.

I do not have $200+ to spend on an AEM or Aeromotive adjustable unit, I spent $200 on 2/3rds of my turbo stuff. (Excluding the turbo)

Re: Someone with a fuel pressure gauge, do me a favor
 

isn't stock supposed to be like 40-50?
you must be making hella power to need twice as much ::)

Re: Someone with a fuel pressure gauge, do me a favor
 

:(

stock is 43-44 IIRC. 100-110 is not safe, and I'm not making hella power yet, I will be making 250+ once I get an ECU, oil lines, and injectors for the turbo kit thats ready to go on the car.

Re: Someone with a fuel pressure gauge, do me a favor
 

Completely and totally wrong, on every level.

1) B&M is a known path to failure, which is exactly what you are experiencing.
2) Having $200 to throw away on an AEM or Aeromotive adjustable unit that you do not need is not the issue at hand here.
3) You, sir, dine on cocks.


I hate adjustable FPRs. You know what I have to do everytime a car rolls up with one? I waste 5-15 minutes of my time setting it to the stock 41 psi for no logical reason. If they'd just rolled up with a B-series large exit unit, ----, they never ever ever go bad and can handle Walbro 255 HP, A1000, etc. I've made 640+ on a stock regulator, and as soon as Goforth's new mani/turbo goes on I'll make 900. What the ---- is so special with your $200 kit that you think you need an adjustable unit, and a crappy adjustible unit at that.

Re: Someone with a fuel pressure gauge, do me a favor
 

I asked before 'what is a large exit B-series unit' and no one answered me, what it is, where to get it, or how much it cost. I know my stock 96 B18B1 FPR can't handle 255lph, and that it would be north of 55PSI which is too much.

I got the adjustable because I was told it would work 'good enough' and that the stocker would not.

PLEASE LINK ME TO WHAT I SHOULD BUY!!!

Re: Someone with a fuel pressure gauge, do me a favor
 

Keep going thru FPR until you find the big one.

Joey posted it on honda-tech somewhere, you'll find it.

Re: Someone with a fuel pressure gauge, do me a favor
 

haha my stang loved the afpr hahaa

Re: Someone with a fuel pressure gauge, do me a favor
 

I've boosted all kinds of shiz and have never needed to upgrade the FPR....and I always use Walbro255 (the non-HP version) Am I missing something about your particular setup?

Re: Someone with a fuel pressure gauge, do me a favor
 

Using a Walbro with stock regulator puts it at 55-60PSI, while its safer/healthier for the pump to run and injectors to run at 43-44PSI to my understanding.

I installed an B+M unit because I was told that this would allow me to run stock PSI in the rail essentially (STOCK ECU still, NOT chipped)

Re: Someone with a fuel pressure gauge, do me a favor
 

If the stock valve assembly won't hold reliable pressure how is jury rigging the spring/diaphragm while keeping the substandard valve body going to control anything? Find a big exit B series.

Re: Someone with a fuel pressure gauge, do me a favor
 

Again, What is a "Big Exit B series" Give me a link, or a pic, anything...

Re: Someone with a fuel pressure gauge, do me a favor
 

http://img231.imageshack.us/img231/9...8080932il7.jpg

http://img85.imageshack.us/img85/9634/0128080933ng9.jpg

Re: Someone with a fuel pressure gauge, do me a favor
 

What is it off of? certian years/models?

Re: Someone with a fuel pressure gauge, do me a favor
 

A lot of them. I never kept track. But I never have to look hard when I need one.

Re: Someone with a fuel pressure gauge, do me a favor
 

---- JD, I though your were just full of ---- like always!

Re: Someone with a fuel pressure gauge, do me a favor
 

Bite me, cock mongrel!

Re: Someone with a fuel pressure gauge, do me a favor
 

those hands looks like my girl hands :-X J/K

Re: Someone with a fuel pressure gauge, do me a favor
 

Et tu, Walter?? D:

Re: Someone with a fuel pressure gauge, do me a favor
 

lol! if you looks how looks my hands...after to replace the clutck kit :3

Re: Someone with a fuel pressure gauge, do me a favor
 

Stick a mainshaft in your ass mountain boy.

Re: Someone with a fuel pressure gauge, do me a favor
 

So anyone know what these come off of?

Re: Someone with a fuel pressure gauge, do me a favor
 

or where I can buy one... anyone?

Re: Someone with a fuel pressure gauge, do me a favor
 

Your HT origins are showing.

Go to the yard and poke around, holmes.

Re: Someone with a fuel pressure gauge, do me a favor
 

I live in the boonies, All the yards in my area are filled with rusted-out old Full sized trucks and sedans, no imports.

Closest yard with a decent selection of Imports is over an hour away and had 3 integras last time I checked, that was about it. (I assume when you say big exit B-series, you mean it only comes off of B-series motors.

Re: Someone with a fuel pressure gauge, do me a favor
 

I have the big exit b-series fpr you need $25 shipped oh wait you came here from ht $35 shipped j/p