solid CEL wont start d16z6
 

ok well it started with my temp guage not working so i tested the guage it was fine..must be my coolant temp sensor yadda yadda...anyway i for got to disconnect a wire while i was testing the guage and went to start the car...POP then nothing the fuel pump wont prime and it wont even turn over i checked all fuses and all are good...checked most realays that i though may have blown but still nothing..any suggestions to helping me get it started again ?.....ya i know its a noob question but im by far a newb i just lost my password to my old account as Turdbo iv been part of HMT for years :cool:

check ur ecu fuse
sounds like u blew it
and if u did one of your sensors most likely grounded out

see the thing is i tested the fuse :confused:

When u jumped it to get the CEL it still stayed solid?

ya i even tried seeing if it had a code...solid cel

ok well here we go again... i had an aftermarket temp guage in my car so i removed it to hook the factory guage back up, got that done, and i also have an aftermarket electric fan that i was going to hook up to a switch, but decided i'll just hook the fan up into the factory wires so i wouldnt have to manually turn it on and off ...got that done also

but the downside is.... now that everything is hooked up the way it should be ...the car still doesnt start but now the electric fan turns on everytime i turn the ignition to start but turns off when the key is in accel or power on position,,go to start it up again turns on again??? and in the engine bay i seem to hear a hiss or quiet hum sound wtf??

im taking my ecu out and my buddy has a hatch that i can test the ecu on see if the car starts with my ecu...if that aint it i'll try the main relay....but why in the hell does my electric fan turn on everytime i try starting the car? whats that humming?

Humming could be fuel pump
Yea try a different ecu on ur car

Ya the humming isn't coming from the pump itself but more in the engine bay

my car will do it sometimes idk what it is either
maybe relay? idk

you should be able to hear the main relay. if not though just cycle the key in the ignition while touching the relay you will definetly be able to feel it working