HomemadeTurbo - DIY Turbo Forum
Page 1 of 2
1
2
Show 40 post(s) from this thread on one page

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Hybrid/Tech (https://www.homemadeturbo.com/hybrid-tech-8/)
-   -   smoke!! but ok comp.? (https://www.homemadeturbo.com/hybrid-tech-8/smoke-but-ok-comp-41187/)

Del Slow 1 06-15-2005 12:19 AM
smoke!! but ok comp.?
 
i smoke like a mother F. but under lots of rpm only.. i checked my comp.. and there all in mid 100's like 120's...went to try a leak down but the adapter wouldnt go in the valve cover ! damn didnt have the right one.. what else is there to worry about then rings ? valve seals right ? im still boostin soon .. ---- it !!!

imadouche 06-15-2005 12:33 AM
Re: smoke!! but ok comp.?
 
Originally Posted by Del Slow 1
i smoke like a mother F. but under lots of rpm only.. i checked my comp.. and there all in mid 100's like 120's...went to try a leak down but the adapter wouldnt go in the valve cover ! damn didnt have the right one.. what else is there to worry about then rings ? valve seals right ? im still boostin soon .. ---- it !!!
Instead of worrying about the piston rings I would worry about ringlands

Pistons = Fried

You suck :D

FooK 06-15-2005 12:39 AM
Re: smoke!! but ok comp.?
 
those comp #'s are mass low.

Donald125 06-15-2005 03:01 AM
Re: smoke!! but ok comp.?
 
100 is very low

PureCRXtasy 06-15-2005 03:15 PM
Re: smoke!! but ok comp.?
 
Let put it this way.. My car burns mad oil and I've been sitting on my turbo kit for probably 2 years now waiting to swap engines so I can boost. My compression is 155-160-160-165 right now. If you boost on what you have now, it will last all of 10 minutes.

Del Slow 1 06-19-2005 03:55 AM
Re: smoke!! but ok comp.?
 
YEAAAAAA... sounds good to be me now ! ;D thanks everyone..Now i need a short block !!!! ---- trying to split the case ! :-\

raiden571 06-19-2005 10:45 AM
Re: smoke!! but ok comp.?
 
why not? get some forged internals. tuner toys rods and wiseco pistons, and if ur poor, vitaras work very well, several members on here haven proven there strength

Del Slow 1 06-19-2005 01:33 PM
Re: smoke!! but ok comp.?
 
i was readin in Chiltons.. that around 200rmp 130's was what compretion should be ?...and was told mid 100's is where i should be ?....Why cant i ---- out money like some people...Crisp $100's would be quite nice ! :D

FooK 06-19-2005 01:47 PM
Re: smoke!! but ok comp.?
 
Originally Posted by Del Slow 1
i was readin in Chiltons.. that around 200rmp 130's was what compretion should be ?...and was told mid 100's is where i should be ?....Why cant i ---- out money like some people...Crisp $100's would be quite nice ! :D
My z6 tests a warm compression of 195psi in all 4 cylinders, it showed 110-120 #'s when the pistons were broken, so yes your compression sucks butt.

Del Slow 1 06-19-2005 02:27 PM
Re: smoke!! but ok comp.?
 
fuuuck...d series are the cheapest ------ motors and still im too poor and impatient..i need a better job...minimum for being a janitor :( SUCKS !


All times are GMT -5. The time now is 04:27 PM.
Page 1 of 2
1
2
Show 40 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands