"Reverse" mini me timing belt
 

I'm throwing an A6 head on a Z6 block and I'm using a new A6 timing belt. it seems a bit too long, is this the right belt?

Re: "Reverse" mini me timing belt
 

use a z6 belt

Re: "Reverse" mini me timing belt
 

Took your advice and tried it. Too short.

Any other ideas? So far the A6 belt is too long... what other options do I have?

Re: "Reverse" mini me timing belt
 

cut the belt

count the teeth, split the difference, look for a new belt. or maybe add another pulley to take slack out

Re: "Reverse" mini me timing belt
 

i would use a VX belt then

Re: "Reverse" mini me timing belt
 

That's what I'm going to try next. I think it's a 106 or 105 tooth belt. Otherwise I'm going to grab an A6 tensioner and see if that works.

Re: "Reverse" mini me timing belt
 

i was gonna seggest you use the tensioner form the a6

Re: "Reverse" mini me timing belt
 

Did you get it fixed?? I was wondering how it turned out. I was always told that you should match the timing belt, water pump, and tensioner to what ever head you were using. Hope it worked out