rear motor mount?
 

ok the car is 91 crx si w/b16 it has hasport mounts..well the rear mount is toast and i got a replacement bushing from hasport but i cant figure out how to get the damn mount out of the car i unbolted this brackit but i cant get this sob out of the car its right in the way of the mount itself...so my question is dose this brackit come aprt or di i have to take something else off to get the mount off.any help would be helpfully b/c i ttok off work to do this and its taking longer than i expected..
http://i102.photobucket.com/albums/m...2323/mount.jpg

Re: rear motor mount?
 

you're gonna have to unbolt the other mounts and lift/tilt the motor up and forward about 2-3 inches.

Re: rear motor mount?
 

There are the 3 bolts going threw the motor/trans and then the one bolt threw the mount itself..once those are out you can put a jack under the motor and unbolt the drivers side mount...then you might have enough slack to move the motor around and try and get the bracket out...you might want to try and unbolt the rear mount from the rear crossmember first...then you might be able to remove it, if you have some 3/8 extensions and a swivel you can get to them...its a bitch but its possibe

Re: rear motor mount?
 

thank that makes a lil more since... i was thinking about unbolting the other mounts but i wasent sure but thanks for the help...

Re: rear motor mount?
 

Oh yeah, tap the mount towards the driver side to gain more accesss to the rear bolt.