re. je pistons and eagle rods
 

since no one reply to my previous post of help,I deciided to re post to see if I get some attention. I went ahead and bought a set of je forged pistons and eagle rods but they are for a integra 1.8 with 81.5mm bore, I'm pretty sure all I need to do is bore my sleeves to fit these pistons, and the rods should fit without modification, they are H beam. I just need guidance to see if I'm on the right track.

Re:re. je pistons and eagle rods
 

what is your bore now, 81?? if so, just bore .5, as far as the rods, i'm kind of stupid and don't know if 1.6 and 1.8 rods are the same, if they are, yeah, they will clear with no modification to the block.

Re:re. je pistons and eagle rods
 

ok thanks! I just hope I did not fucked up on the rods, they was a damn good deal, $590 for eveything including pins, rings brand new. I'll be pissed, if I have to use my stock rods.

Re:re. je pistons and eagle rods
 

they may be the same, but i'm not sure. besides, if they aren't, just sell them and get the right ones.

Re:re. je pistons and eagle rods
 

Everything works with enough modification. (Worst case)
Call larry at endyne. He always has the answers, and you won't need to search for his attention, he'll give it to you. www.theoldone.com

Re:re. je pistons and eagle rods
 

well rudebwoy, you might get pissed cause this thread has been in the classifieds for a while, he's selling b16 pistons, rods, and rings for 90 bucks https://www.homemadeturbo.com/forum/...threadid=12449

oh well, at least you got the good stuff now ;D

Re:re. je pistons and eagle rods
 

i hade to notch the bottom of the block to fit the h beams in my d16z6 i heard you have to do it in b16 and b18 motors also call EAGLE Specialty Products 1-662-796-7373 they'll have the best answer. Please reply back i'd like to find out myself, Thanks

Re:re. je pistons and eagle rods
 

hmmmmmmmm......... i heard you only had to notch d series???

Re:re. je pistons and eagle rods
 

[quote=projekteg

I saw them! but after what happen to my stock pistons I lost faith in original parts.


]
well rudebwoy, you might get pissed cause this thread has been in the classifieds for a while, he's selling b16 pistons, rods, and rings for 90 bucks https://www.homemadeturbo.com/forum/...threadid=12449

oh well, at least you got the good stuff now ;D

Re:re. je pistons and eagle rods
 

[quote=thomas
are you sure yours was H beam? I thought H beam is direct fit.

]
i hade to notch the bottom of the block to fit the h beams in my d16z6 i heard you have to do it in b16 and b18 motors also call EAGLE Specialty Products 1-662-796-7373 they'll have the best answer. Please reply back i'd like to find out myself, Thanks