question about the zc motor
 

ok i got the zc in it starts runs but if you hit the gas it just doesnt rev right you have to hit the throttle hard then it revs up ive been getting code 7 on the ecu for the tps i havent been able to find one yet but is this the only cause that would do this what about timming? or vaccum leaks cause this problem if anyone has a spare tps they would like to sell let me know thanks

Re:question about the zc motor
 

Throw an OHM meter on your TPS and get back with what it reads when closed and at WOT (wide open throttle)

Deff. sounds like thats your problem.

Re:question about the zc motor
 

Set tps to .4v to .5v at closed postion.

Jeff