HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Hybrid/Tech (https://www.homemadeturbo.com/hybrid-tech-8/)
-   -   question about springs? (https://www.homemadeturbo.com/hybrid-tech-8/question-about-springs-64076/)

turbocivic6776 06-30-2006 12:33 AM

question about springs?
 
ok i want to lower my car like 2.5 inches its a 95 4dr and my girlfriend has some eibach pro kit springs for a 2000 dx will they work??
if not does anyone know of a good brand spring to use, eibach is a little too expensive if my girls wont work. like would the shitty coilovers from pepboys do the job or is it like most things u get what u pay for??

turbocivic6776 07-01-2006 10:37 AM

Re: question about springs?
 
does anyone have any idea? i know it says for applications they have 96-00 and theres a seperate set of springs for 92-95 but is that just because the ride height might change since they have different chassis or is it because they wont work?

JDMFantasy2K 07-01-2006 11:34 AM

Re: question about springs?
 
well i've put 6th gen front struts into a 5th gen. Most of the suspension components apprear to be the same, i'm willing to bet though that some slight measurements might be different. (or possible the differences between the springs is height, or spring rate). I do know that you can put dc2 springs into a 6th gen civic. So i'd just give it a shot, if it doesn't fit you can always throw you stock ---- back in and figure out a different way.

turbocivic6776 07-01-2006 11:36 PM

Re: question about springs?
 
yea i think i will try and if they dont work ill just buy a set while it is apart. sounds good thanx for the knowledge

z1guy 07-01-2006 11:37 PM

Re: question about springs?
 
they are not the same, sorry. might work, but they arent the same.

SkunT 07-02-2006 12:58 AM

Re: question about springs?
 
I just got a set of H&R race springs for $150 from kingmotorsports.com great deal.

Tom-Guy 07-03-2006 01:00 AM

Re: question about springs?
 
Regardless of what brand they are labelled, 95% of the coil springs made in the world come from either Eibach or Carerra, IIRC - there were only two manufacturers in the world.

The problem with cheap coilovers is not the spring, which is generally fine, it is with the assfuck threaded collar that splits and is funky and doesn't fit right in the first place.

You ever hear of Goldline springs? They are a good quality spring that will over-lower your car so it doesn't handle correctly, and will ride excessivley bumpy when combined with the cheapest struts available which are not meant for the Goldline's stiffness or ride height. This should acheive the effect I ASSume you are going for, based on all your comments.

Bone1 07-03-2006 02:00 AM

Re: question about springs?
 
JD, don't forget H&R.......

turbocivic6776 07-04-2006 10:47 PM

Re: question about springs?
 
nah im not goin for an overly lowered car just somthing that will help handling a little and make it look good i just think the stock height is a little high for me that's all, im planning on getting those same springs that u got from kingmotorsports for my car sounds like a good deal to me! thanx for the link

Tom-Guy 07-05-2006 01:35 AM

Re: question about springs?
 

Originally Posted by turbocivic6776
nah im not goin for an overly lowered car just somthing that will help handling a little and make it look good i just think the stock height is a little high for me that's all,

Then lower it to Si ride height, or at most 1/4" below stock Si height. Anything lower hurts handling... lower CG is nice and all, but not when the suspension's dynamic casotr/camber/toe becomes ------- retarded.

z1guy 07-05-2006 02:33 AM

Re: question about springs?
 

Originally Posted by Joseph Davis
Then lower it to Si ride height, or at most 1/4" below stock Si height. Anything lower hurts handling... lower CG is nice and all, but not when the suspension's dynamic casotr/camber/toe becomes ------- retarded.

awesome, i got quoted in someones sig, sweet.

oh, and by the way........ not going to turn this into an arguement, but caster is spelt wrong, HAHA

Tom-Guy 07-05-2006 02:51 AM

Re: question about springs?
 

Originally Posted by z1guy
oh, and by the way........ not going to turn this into an arguement, but caster is spelt wrong, HAHA

Funny, because dictionary entries of caster and castor are listed as synonyms of each other. You are aware of the seven different correct variants of "carberetter," aren't you? Or that I took the WAIS-R at 14, and scored near perfect on vocabulary? WTF does "frente" mean, and why can't I find a definition of it anywhere? Someone somewhere is bullshitting.

Hey, work on your grammar for me, huh? ::)

z1guy 07-05-2006 03:01 AM

Re: question about springs?
 

Originally Posted by Joseph Davis
Funny, because dictionary entries of caster and castor are listed as synonyms of each other. You are aware of the seven different correct variants of "carberetter," aren't you? Or that I took the WAIS-R at 14, and scored near perfect on vocabulary? WTF does "frente" mean, and why can't I find a definition of it anywhere? Someone somewhere is bullshitting.

Hey, work on your grammar for me, huh? ::)

like i said, no arguement from me this time. just wanted to say love the new sig.

Tom-Guy 07-05-2006 03:05 AM

Re: question about springs?
 
It's not the best I've sported, but it'll do until I get bored.

z1guy 07-05-2006 03:27 AM

Re: question about springs?
 

Originally Posted by Joseph Davis
It's not the best I've sported, but it'll do until I get bored.

i can make you a better one if you wish. sure as hell beats the ---- out of being nice to you stupid bastards.

Tom-Guy 07-05-2006 03:36 AM

Re: question about springs?
 
Haha, go for it. :y

z1guy 07-05-2006 03:57 AM

Re: question about springs?
 

Originally Posted by Joseph Davis
Haha, go for it. :y

i gotta find some dumb ass post with a shitload of misinformation in it, much like the D15b2 powa thread.

Tom-Guy 07-05-2006 03:59 AM

Re: question about springs?
 
Any post by username "Stealthmode" made outside of General Discussion should fit the bill.

z1guy 07-05-2006 04:13 AM

Re: question about springs?
 

Originally Posted by Joseph Davis
Any post by username "Stealthmode" made outside of General Discussion should fit the bill.

nice, i shall search for such threads by steve. i find it interesting to argue with people over the internet, but fear that one day i might get beat up because of my loud mouth, so either i am too stupid to care, or too big to worry. by the way, i weigh a whopping 140lbs. ::)

oh, and im not really gonna start any arguements w/ steve.

turbocivic6776 07-05-2006 01:54 PM

Re: question about springs?
 
do u mean use the springs from a 99-2000 si or a 92-95 hatch si?

Tom-Guy 07-05-2006 01:56 PM

Re: question about springs?
 

Originally Posted by z1guy
i weigh a whopping 140lbs. ::)

You and every other internet loudmouth. I've got ten on ya, son.


Originally Posted by z1guy
oh, and im not really gonna start any arguements w/ steve.

Wussie.

z1guy 07-05-2006 02:01 PM

Re: question about springs?
 

Originally Posted by Joseph Davis
You and every other internet loudmouth. I've got ten on ya, son.

Wussie.

i cn c haw u tink i a wuzy bot i don car wat u tink. AHAHAHAHAH

turbocivic6776 07-05-2006 09:30 PM

Re: question about springs?
 
WHICH SI SPRINGSR5 U TALKIN?


All times are GMT -5. The time now is 07:33 AM.


© 2024 MH Sub I, LLC dba Internet Brands