problems taking my car back to stock.
 

I took the turbo setup off my car so I can go smog it soon. I pulled everything off, put the stock header back on, etc.

I got some injectors from renr to use, they are OBD1 injectors.

when I tried to start the car after I took it all off the ------- thing wouldn't even turn over, then I realized I hadn't changed the settings on the AFC back to stock.

I changed the settings all back to 0% now and it will turn over, but it sounds as if one cylinder is out.

the car ran fine when it was boosted, w/ no problems whatsoever. the resistors are out the settings are all at 0%. I don't get it. If an injector were "bad" could it possibly not be putting any fuel through? or maybe just a little teeny bit of fuel is coming through? the timing is retarded 3o still from being boosted, but that wouln't make it sound as if it was only running on 3. what the ----? anything you guys can think of?

Re:problems taking my car back to stock.
 

if all you changed was the injectors, my bet would be one of them is bad. put a screw driver on the metal body of the injectors and put your ear up to the plastic handle (like a stethoscope), they should click, but if one is clicking more than usual, it's prolly bad, this is an easy way to tell, but doesn't always work, or you could just change them out. you sure you didn't knock a plug wire loose or something?

Re:problems taking my car back to stock.
 

See, you should have taken my injectors. :P

That seems like the only thing it could be, unless you accidently unplugged something while you were working. Check the plugs?
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:problems taking my car back to stock.
 

make sure u got the right injector plugs on the right injector?

Re:problems taking my car back to stock.
 

I have had injectors stick from sitting before, sometimes just letting it run will flush them out or even putting jumper wires with a full 12volts to them will clear them out. The old fuel will turn to varnesh(sp?) if left too long. I am not saying this is it I have just seen it a few times when I install used injectors/engines at work. ;)

Re:problems taking my car back to stock.
 

this might sound dumb, but maybe one of your spark plugs became loose or something, maybe you bumped something, on the dizzy side. just an idea....

Re:problems taking my car back to stock.
 

i`d say he should have take MINE injectors :P

Re:problems taking my car back to stock.
 

it's not a sprak plug, I can garauntee that, I'm not an idiot. I think it is an injector, only problem is It doesn't run liong enough for me to check which one is bad.

Re:problems taking my car back to stock.
 

the magic injector fairies came to visit me last night, I went outside just now and started the car, and it runs totally fine, no problems whatsoever. it's ------- nuts.

Re:problems taking my car back to stock.
 

I stopped by last night an had a look at it for you. Don't worry, I got it all taken care of. Take it easy. Have a beer. :)
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote