problems with 88 hatch
i bought a 88 civic hatch with a dual point i converted it to 0bd1 witha z6 with the jumper and the p28 but i have the check engine light on and i dont know how to get the code
the car starts up good but once u step on the gas it boggs down then picks up i checked the spark plugs and 1 and 3 are soaked in gas what can it be i changed the ignitor and the coil ,cap ,rotor, and wires i dont know any info would be help ful |
Re: problems with 88 hatch
what dizzy are you running? obd1 or obd0 ?
|
Re: problems with 88 hatch
did you switch the tps wires?
|
Re: problems with 88 hatch
I USED THE THE OBD1 Z6 DIZZY AND THE TPS IS RIGHT CAUSE IT IDLES NORMAL I DONT KNOW
|
Re: problems with 88 hatch
Jesus, can't you fuckers tell when the CAPS LOCK is on?
Get a noid light and check the injector pulsewidth vs. tps, also if you're OBD1 converted it's the same way you'd check any other OBD1 ecu. |
Re: problems with 88 hatch
sorry about the caps but
ok ill try out the injectors ill keep u guys posted |
All times are GMT -5. The time now is 06:23 PM. |
© 2024 MH Sub I, LLC dba Internet Brands