which piston rings?
this motor is gonna be a daily driver on low boost, D series, i was thinking about OEM rings but i havent decided, anyone know of good rings slightly better than oem but will last a decent while?
thanks eric |
Re:which piston rings?
anyone? ???
|
Re:which piston rings?
NAPA RINGS OWN ;D
get oem nukka, although my all motor d15 isn't even gona use oem bearings, ---- that ---- is expensive |
Re:which piston rings?
NPR rings..
|
Re:which piston rings?
ill have to look into them, any prices?
oem (for the pistons im using) will be 25ish and some change, so i was just curious if i could get much better for a little more or the same, anyhow i will do some more researching, thanks eric |
Re:which piston rings?
go wit total seal they worked great on my z6 at 8 psi
|
Re:which piston rings?
ive heard bad about them eggin cylinders after 5-10k miles
|
Re:which piston rings?
Originally Posted by jdmhatchracer94
go wit total seal they worked great on my z6 at 8 psi
|
All times are GMT -5. The time now is 08:18 PM. |
© 2024 MH Sub I, LLC dba Internet Brands