oil on flywheel?
 

so i am pretty sure i have tranny oil leakin on my flywheel which is causeing my new clutch it to slip.. what would be some of the seals that would be causein that to leak? would it be my driver-side axle seal?im not to sure. so i figured someone might have a few ideas. i have the ZC L3 tranny by the way. thanks for the help guys

Re: oil on flywheel?
 

have you checked your rear main seal?

Re: oil on flywheel?
 

+1 for rear main

Re: oil on flywheel?
 

+2

Are you sure it's tranny oil? If so, it's probably ISB seal or less likely interlock guide bolt. Bad axle seals shouldn't get your flywheel wet.

Re: oil on flywheel?
 

rear main or ISB seal.

Check your fluid levels.

If ISB seal is leaking, likely the ISB is toast.

Re: oil on flywheel?
 

You should fix that as soon as possible..

It's a simple job, but can be long to get done simply because of the amount of work.

Do yourself a favor and buy a second seal when you plan to do it.. Nothing worse than ------- up a seal on a Sunday at 5 Pm after the shop is closed.

They are normally cheap.

Re: oil on flywheel?
 

+5 I found a leaky rear main last time I threw a clutch in. Never even thought of it luckily I had other blocks to pirate.

Re: oil on flywheel?
 

+800 this is about has common has a white person enjoying orange chicken. Alot of work for a seal but it needs to be done.

Re: oil on flywheel?
 

LMAO, you and your orange chicken..... i guess im a newb but wtf is a ISB?

Re: oil on flywheel?
 

Input Shaft Bearing?

LOL