oil control jet on b18a1 block with vtec head
 

do i need to take out the oil control jet in the block when i put the vtec head on? i took it out...but i put it back in so i wont lose it. now it doesnt have the factory seal anymore...it just freely comes out if i take a pin and pull it out....before i had to break the factory seal and it was a lil tough but it popped out nicely...anywho do i need to leave it in and put a new seal on it or will it stay in there or should i take it out entirely ???

Re:oil control jet on b18a1 block with vtec head
 

you have to remove the jet and plug it.

look at this site.

http://www.c-speedracing.com/howto/lsvtec/lsvtec.php

Re:oil control jet on b18a1 block with vtec head
 

thank you so much dude....i swear ive been getting no where with answers from people til you came along...

Re:oil control jet on b18a1 block with vtec head
 

I welded my ----... then had it resurfaced...

It probably wasnt the best idea, hah

C-speed racing, they are local boys.. good shiet :)

Re:oil control jet on b18a1 block with vtec head
 

welding that up wont hurt anything if you resurface it. just drill the fucker out if it has to go back on a vtec block.

Re:oil control jet on b18a1 block with vtec head
 

the only thing it hurts is if you want to go back to stock ;) lol