odb0 or obd1 distributor for my swap.. need a little help.
 

Car: 1991 crx si
Engine: D16Z6 (sohc vtec)
What distributor should i use? the z6's? or my old one drilled to fit the new engine?

someone told me the obd1 distributor wont work with a preobd ecu.

i have a harness for the distributor so the plugs and plays right up to the obd0 plugs.

Re: odb0 or obd1 distributor for my swap.. need a little help.
 

use the obd-1 dist.

-Alex

Re: odb0 or obd1 distributor for my swap.. need a little help.
 

---- that, modify the stock dizzy to work, 10 times easier..

Re: odb0 or obd1 distributor for my swap.. need a little help.
 

abaz, this is the dizzy harness that lets the obd1 dizzy fit the obd0 plugs.. would it work though with the pm6 ecu still or should i just use my stock obd0 dizzy till i get a p28 ecu and convert the plugs on the ecu side for obd1 also.
http://www.importjdm.com/obd0obd1.JPG

Re: odb0 or obd1 distributor for my swap.. need a little help.
 

It's worth a shot, but the sensors inside a OBD1 dizzy and obd0 dizzy are different, and I'm not sure if it will work correctly on the pm6.

Jeff