OBD2 Y7 engine into EG

Reply Subscribe

Thread Tools

Search this Thread

10-06-2006, 01:49 AM

blackoutgt

0.5 BAR

Thread Starter

Join Date: Nov 2005

Location: new phila

Posts: 169

OBD2 Y7 engine into EG

ive searched this alot, found alot about obd0 > obd1 but nothing on this...

im not going to buy the harness for this... if i change all the sensors and hardwire them into my Z6 harness will this work?... i want to keep the car obd1... or whatever is easiest... i need some opions on this... im buying the y7 tomarrow, and getting it sunday... need info asap...

-thanks..

(ps. im downgrading cause my engine is shot and i need something to drive!... plus i have an almost complete turbo kit that is perfect for this)

10-06-2006, 01:51 AM

Bone1

0.0 BAR

Join Date: Jan 2005

Posts: 0

Re: OBD2 Y7 engine into EG

slap on a D15B7/D15B8 dizzy and run a PO6 ecu and be done.........

10-06-2006, 01:53 AM

blackoutgt

0.5 BAR

Thread Starter

Join Date: Nov 2005

Location: new phila

Posts: 169

Re: OBD2 Y7 engine into EG

Quote:

Originally Posted by Mista Bone

slap on a D15B7/D15B8 dizzy and run a PO6 ecu and be done.........

does this still include hardwiring and swapping all the sensors?... (im new to obd2)

10-06-2006, 05:23 PM

ghettoturbo

Guest

Posts: n/a

Re: OBD2 Y7 engine into EG

there is no wiring to be done...just get the right ecu, injectors, and dizzy

10-08-2006, 10:02 PM

blackoutgt

0.5 BAR

Thread Starter

Join Date: Nov 2005

Location: new phila

Posts: 169

Re: OBD2 Y7 engine into EG

Quote:

Originally Posted by ghettoturbo

there is no wiring to be done...just get the right ecu, injectors, and dizzy

which ecu , dizzy, and injectors?.... i want to run this engine as an obd 1... should i swap sensors if i dont get this things...

- thanks

10-08-2006, 10:18 PM

ghettoturbo

Guest

Posts: n/a

Re: OBD2 Y7 engine into EG

Quote:

Originally Posted by blackoutgt

which ecu , dizzy, and injectors?.... i want to run this engine as an obd 1... should i swap sensors if i dont get this things...

- thanks

obd1 non-vtec ecu and dizzy and obd1 injectors....just take the dizzy and intake mani off the old motor (esp since the y7 one blows donkey dick)

10-08-2006, 11:11 PM

blackoutgt

0.5 BAR

Thread Starter

Join Date: Nov 2005

Location: new phila

Posts: 169

Re: OBD2 Y7 engine into EG

oh alright.. that seems simple enough.. so i can even use my z6 injectors with z6 manifold?... if i understood that right.. thats awsome...

u said use non-vtec dizzy and then u said the one off the old motor... my old motor is a d16z6... so i would need a diferent one correct?

thanks alot!

10-09-2006, 09:33 PM

ghettoturbo

Guest

Posts: n/a

Re: OBD2 Y7 engine into EG

when i did this exact swap i used a non-vtec obd1 dizzy...but i dont know if the z6 one wold work im no swap master, bolt it up if it fits and try it or wait for another response

10-10-2006, 07:58 AM

blackoutgt

0.5 BAR

Thread Starter

Join Date: Nov 2005

Location: new phila

Posts: 169

Re: OBD2 Y7 engine into EG

hmmn.. ok.. i read up on this on another site... it said i can use my entire z6 fuel rail... but im still debating whether or not i can use the p28 ecu and dizzzy