obd1 crx problems. spark but no fuel
 

Me and my buddy are tryin to get his '88 Si to start. full z6,obd1 dizzy, p28 ecu, and rywire coversion harness. The motor came with a fishy Si harness with the needed plugs for obd1

It has spark, but no fuel. I re-timed it correctly.
We just found today that the injectors have OBD-0 clips, but were wired with no resistor box.

Could they have burnt up? We installed a resistor box but still no luck.

i know there is fuel pressure b/c a line was loose and leaked.


CEL's are 21, 10, and 6.

Re: obd1 crx problems. spark but no fuel
 

An OBDI wont need a resistor box if you used the Z6 injectors. Did the car ever run?

Re: obd1 crx problems. spark but no fuel
 

the previous owner of the motor/harness said it started for a minute then wouldn't run.
the crx ran good until someone stole all the obd1 stuff...found em beat the ---- out of them but the car never would run after that.

are the injector clips interchangable? if not then it has obd0 injectors and had the resistor box removed. (with 12v going to injectors)

will that fry a set of injectors? took the plug out and didnt smell any gas.