OBD0 to OBD1 dizzy problem. I searched
 

Well i really cant find anything on this. i got down to 3 wires left to connect and realized there are 2 white wires but not 2 on the obd1 plug.

I am using an LS obd0 dizzy and i cut the plugs off my d series obd1 dizzy. no comments on the wire butt connectors, lol i just didnt want to solder and shrink wrap. but let me know what you think or if there is a diagram around. The obd1 plug, one of the white wires has red tape on the connector but i have no clue where that one is now cause i snipped. Thanks.

http://www.xlsite.com/xemox/S4200003.JPG

Re: OBD0 to OBD1 dizzy problem. I searched
 

wrong forum you emo retard