obd0 b18a1 swap into 91 crx Si. no eacv wires to plug it in? wtf? help!
 

basicly what the subject says, i put a b18a1 out of a 91 integra LS in my 91 crx Si. and i have the crx harness and map sensors hooked up. am i just retarded and cant find the plug for my EACV to plug it in and fix my erattic idle. or is there really not a eacv on the crx harness... i do have the entire harness for the integra, but id like to save a little time by not having to change the entire thing out..
thanks

Re: obd0 b18a1 swap into 91 crx Si. no eacv wires to plug it in? wtf? help!
 

there should be

Re: obd0 b18a1 swap into 91 crx Si. no eacv wires to plug it in? wtf? help!
 

bingo!

Re: obd0 b18a1 swap into 91 crx Si. no eacv wires to plug it in? wtf? help!
 

make sure you dont have the harness tucked down behind the intake manifold. It should be right there, its the same style connector as the Intake air temp sensor, 2 wire. Just keep looking, you'll find it