obd0 b18 into 95 civic help
 

I've got both cars, complete in running condition and im trying to swap the smokey d15 for the b18. I know im going to need to chip the po6 to run the LS. Or could I just change the wiring over and run the pr4? Is there a conversion harness that I can buy/make. Or is it totally stupid to change the car over to obd0? Someone told me I wont need a mount kit and I can just use the integra mounts to bolt it in. Im going to need a cable-hydro clutch conversion thing. What else am I going to need? Will the obd0 distrubuter work? What axles? A complete run down and parts list of the swap would be helpful. (I already searched)

EDIT: also, what shift linkage do I use? Can I just cut and weld it to make one work?

Re: obd0 b18 into 95 civic help
 

chip the p06 with LS maps. Use your OBD1 distributor on the LS (yes it will fit but you need to slot the holes in the 'legs')

Re: obd0 b18 into 95 civic help
 

and use the integra axles? What about the shift linkage? cut and weld?

Re: obd0 b18 into 95 civic help
 

use the integra linkage it works.