non vtec intakemanifold to vtec intake manifold work ?
 

i know the gaskets and the runers on the vtec amnifold are alot biger so if i throw that on with the biger vtec throttle body will it work thanks for the help

Re: non vtec intakemanifold to vtec intake manifold work ?
 

b16 vs. LS vs. GSR intake manifolds = not interchangeable.

Re: non vtec intakemanifold to vtec intake manifold work ?
 

He's talking D series

Re: non vtec intakemanifold to vtec intake manifold work ?
 

how can you tell?

Re: non vtec intakemanifold to vtec intake manifold work ?
 

It was in gd and crx2fast moved it but it never showed up here.
Looks like the guy just made a new thread.

So 89b16, which d15?

Re: non vtec intakemanifold to vtec intake manifold work ?
 

It made it I delated it

Re: non vtec intakemanifold to vtec intake manifold work ?
 

Happy delated birthday

Re: non vtec intakemanifold to vtec intake manifold work ?
 

well why did it get deleted ? and this is a d16 intake manifold on to a d15

i realy need to know an awnser b4 2morrow. so i know what gaskets to get and if i cant use the d16 intake manifold im going to have to buy a new tps senser. and stock air box cuzz the inlet on the d15 is ------- penis sized to damn small


so thnks for any help on this

Re: non vtec intakemanifold to vtec intake manifold work ?
 

Cause d15's range from 1985-2000


from 8 valve non vtec to carbed d15's to sohc vtec's to vx motors etc



Your post is generic has ---- and has the writing ability of a trained monkey on coke



If you post the right info I might help

Re: non vtec intakemanifold to vtec intake manifold work ?
 

Sig quality material right there ;)

Re: non vtec intakemanifold to vtec intake manifold work ?
 

hahahahaha. But he's trying....and thats what counts! ;D The mani's fit...plain and simple. Who cares if its from a 8 valve or 16...shorter, bigger, smaller runners.....if you're fixing a tps by replacing the mani...then they'll fit if they're from a D. Just make sure the throttle bracket fits.

Re: non vtec intakemanifold to vtec intake manifold work ?
 

its a 92-95 d15 and i want to put the biger d16 v-tec manifold on it im not shure what year it came off. i just know the throttle body is like 2.5 inch and the runers are biger. i didnt know if that would mess up the air flow when going in to the head. being the ports on the head are smaller then the ones on the intake manifold.


so is this a for sure thing i know it bolts right up but will it mess with idel or not run right after the swap is done ?

Re: non vtec intakemanifold to vtec intake manifold work ?
 

All depends on how well you assemble everything :P Unless it'f a cx motor, I wouldn't even bother. Or dual-point :-X

Re: non vtec intakemanifold to vtec intake manifold work ?
 

if it's a d15b7 the tb is the same as the z6. the runners are bigger on the z6 manifold.
since you say it has tiny ports, 92-95 d15, non-vtec, maybe you have a d15b8?
read the stamp on the block.

Re: non vtec intakemanifold to vtec intake manifold work ?
 

it is a d15b8 and the t/b on it is ------- tiny prolly 1 1/2 inch and the other t/b looks to be around 2 1/2 inch

so do you know if it will work right ?

Re: non vtec intakemanifold to vtec intake manifold work ?
 

won't work..........

Re: non vtec intakemanifold to vtec intake manifold work ?
 

well the new intake was put on this morning and my buddys didnt even ask me and being theres a new engine in it and to day is basicly the first day i got it to run almost right heres what i got

new v-tec distributer + v-tec intake manifold = car wont go over 10mph

Re: non vtec intakemanifold to vtec intake manifold work ?
 

its suppose to have that size tb it only has 60 hp


16 valve motor can take all the performaance ----


8 valves strip off sensors and throw them in the trash

Re: non vtec intakemanifold to vtec intake manifold work ?
 

so you have a stock d15b8 + d16z6 manifold/tb and a vtec distributor.
I would start with the distributor timing. did they modify the dizzy to fit the head? what was wrong with the old distributor?

Re: non vtec intakemanifold to vtec intake manifold work ?
 

it looks like they cut the brackets a lil to fit it to the head but other then that dont look like they did anything

Re: non vtec intakemanifold to vtec intake manifold work ?
 

it looks like they cut the brackets a lil to fit it to the head but other then that dont look like they did anything