vizual_blur

Ok so I have this 93 cx, with no spark. Hasnt been ran in at least 2 years. What order should I start to check or replace things to get it running again?

d16u7nh

no spark then check your spark plugs, wires, distributor, fuses.

cloud

igniter, coil, etc. , etc.

vizual_blur

Ok i shoulda said a lil mroe on this. Ive checked everything up to distributor. Such as the only things as far as I know I have left to check are the dist. and ecu?

whiterice

looks at the helms manual for ignition troubleshooting.
it will also show you how to check the wiring and coil.
1 easy thing is to pull the ignitor from the distributor and take it to autozone. they will test it for free.
pep boys and kragen don't test them down here.
another thing is to pull the main relay and take the cover off. check the bottom for broken or cracked solder.
don't forget the ecu and ignition fuses under the hood.

vizual_blur

ok cool. yeah tonight if it doesnt stay freezing and rainy out, imma swap out the dizzy with one tha ti know works. and was gunna check the rest fo the fuses and something thats under the dash by the fuse panel.

benjamin

if it is the dizzy i would seggest looking at a whole new or rebuilt dizzy, I had to replaced some parts on mine and in the end it would have been cheaper and easier to just replace the whole thing. So if you have the money imo get a new/rebuilt dizzy

benjamin

unless its just the cap and/or rotor then just replace those

Jmunk

Double check all your ground wires.