HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Hybrid/Tech (https://www.homemadeturbo.com/hybrid-tech-8/)
-   -   No oil pressure after oil change (https://www.homemadeturbo.com/hybrid-tech-8/no-oil-pressure-after-oil-change-76675/)

boarder360j 04-17-2007 09:26 PM

No oil pressure after oil change
 
1 Attachment(s)
Oil pressure was fine before oil change. Changed oil, and now oil light is on and after market oil pressure gauge is at 0. There are no leaks and there is no oil coming out of any of the oil lines. The only thing i can think of is that the cap for the oil pressure relief feel off inside the oil pan. Let me know what you think.

ZC engine w/ 600 miles on fresh build and turbo. New pump from Honda, oil cooler, and relocated oil filter installed when built.


Here is a picture of the old pump, and you can see the allen head cap which holds the pressure relief...

Attachment 27760

ghettoturbo 04-17-2007 09:38 PM

Re: No oil pressure after oil change
 
lol you sure you put any back in?

boarder360j 04-17-2007 09:40 PM

Re: No oil pressure after oil change
 
Yes

joebowlr21 04-24-2007 12:13 AM

Re: No oil pressure after oil change
 

Originally Posted by ghettoturbo
lol you sure you put any back in?

+1 lol

no but seriosuly.....pull ur oil filter off to check if ur pump is running properly....if ur getting oil into the filter u have oil pressure

EG-prince 04-24-2007 12:33 PM

Re: No oil pressure after oil change
 
oil filter could be fucked/plugged too

Slo_crx1 04-26-2007 12:58 AM

Re: No oil pressure after oil change
 
You know it does take a couple to build oil pressure back up after an oil change...it's not an instantaneous thing. Pull the ecu fuse and crank the motor until you see pressure, then put the fuse back and drive.

HMTguy 04-26-2007 01:07 AM

Re: No oil pressure after oil change
 
It takes 1.5 seconds at most to build pressure after an oil change.

Slo_crx1 04-26-2007 01:39 AM

Re: No oil pressure after oil change
 

Originally Posted by jagojon3
It takes 1.5 seconds at most to build pressure after an oil change.

Mine usually takes closer to 30 seconds. Still not alot of time, but I just hate the idea of 30 seconds with no oil pressure :l

whiterice 04-26-2007 02:52 AM

Re: No oil pressure after oil change
 
How big and long are the oil lines to the oil cooler and filter relocation?

Donald125 04-26-2007 09:43 PM

Re: No oil pressure after oil change
 
take out oil filter, crank and see if oil came out

igotnothin 04-26-2007 10:08 PM

Re: No oil pressure after oil change
 

Originally Posted by slo_crx1
Mine usually takes closer to 30 seconds. Still not alot of time, but I just hate the idea of 30 seconds with no oil pressure :l

are you using an electronic oil gauge...cause 30 sec with low oil pres would pwn your engine...

Electronic sender might just be slow

W O T 04-27-2007 06:27 AM

Re: No oil pressure after oil change
 
It takes about 5 seconds for my oil light to go off on my b16 after a change, thought it was normal

SmellySOHC 04-27-2007 11:41 AM

Re: No oil pressure after oil change
 
mine blinks at me after oil change ;)

Ogubudiah 04-27-2007 11:50 AM

Re: No oil pressure after oil change
 

Originally Posted by SmellySOHC
mine blinks at me after oil change ;)

your gf blinks at me after I check her oil...


All times are GMT -5. The time now is 08:23 PM.


© 2024 MH Sub I, LLC dba Internet Brands