HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Hybrid/Tech (https://www.homemadeturbo.com/hybrid-tech-8/)
-   -   no blinkers-- what am i missing? $10 if u got the answer (https://www.homemadeturbo.com/hybrid-tech-8/no-blinkers-what-am-i-missing-%2410-if-u-got-answer-72618/)

crxtuner 01-20-2007 06:26 AM

Re: no blinkers-- what am i missing? $5 for the help
 
Grab a volt meter, turn key forward once, test the wire before the resistors you put in for current. Then proceed to finding where the current begins/stops and voila you have found your issue. ianmcquade@gmail.com is my paypal btw.

SmellySOHC 01-20-2007 09:25 AM

Re: no blinkers-- what am i missing? $5 for the help
 
if its the resistors then sure.

SmellySOHC 01-21-2007 01:55 PM

Re: no blinkers-- what am i missing? $5 for the help
 
nope wasnt the resistors.. everything back to normal, replaced the fuse for giglles, and replaced the relay under the dash... anything else?? again hazards work but no blinkers, either on dash or all four corners..

igotnothin 01-21-2007 02:23 PM

Re: no blinkers-- what am i missing? $5 for the help
 
if your hazards work, check the blinker switch....maby it went bad...pull the blinker arm off and try and make the turnsignals work by crossing the wires......

JDMFantasy2K 01-21-2007 03:22 PM

Re: no blinkers-- what am i missing? $5 for the help
 
thoguht that blue/red wire always had something to do with OEM fog lights althoguh i'm probably mistaken

SmellySOHC 01-21-2007 04:48 PM

Re: no blinkers-- what am i missing? $5 for the help
 

Originally Posted by igotnothin
if your hazards work, check the blinker switch....maby it went bad...pull the blinker arm off and try and make the turnsignals work by crossing the wires......

ill go pull it now and try er.. its gotta be something like that ^

anyone explain how the blinker arm, hazards and the relay all works?? just curious and mayb itll lead to the answer

igotnothin 01-21-2007 05:26 PM

Re: no blinkers-- what am i missing? $10 if u got the answer
 
lol ^^^

the relay is what makes the blinker and the hazards do the flash part.......the hazard buton activates the electircal curent to the relay and turns on all four courner lights....the blinker arm activates the right left side in the same manner....if your hazards work then it is something from the relay back to the controle switch on the blinker.....

my guess is the blinker switch on the arm.....lmk what ya find...

SmellySOHC 01-21-2007 07:41 PM

Re: no blinkers-- what am i missing? $10 if u got the answer
 
i jumpered the wires, and the lights come on. they dont flash tho. mayb i missed something thats gunna make em flash but i might head to he junk yard to find a good blinker switch arm..

is it just those two screws to pull it off?? im gunna work on it later im done for the nite... its sat for a few months what can randomly cause this?? or what did i do? lol thanks

igotnothin 01-21-2007 07:53 PM

Re: no blinkers-- what am i missing? $10 if u got the answer
 

Originally Posted by SmellySOHC
i jumpered the wires, and the lights come on. they dont flash tho. mayb i missed something thats gunna make em flash but i might head to he junk yard to find a good blinker switch arm..

is it just those two screws to pull it off?? im gunna work on it later im done for the nite... its sat for a few months what can randomly cause this?? or what did i do? lol thanks

im pretty sure its only the two screws...... if i were you id pick up another relay just in case.....i belive when you jump the turnsignal it should work..... maby your relay is going bad as well..... or it could be just the realy , but that is odd cause you say your hazards work......but id defintly pic up a new blinker arm and a relay...and give it a try.

SmellySOHC 01-22-2007 12:44 AM

Re: no blinkers-- what am i missing? $10 if u got the answer
 
it is a new relay but i will tomarrow its my day off wish me luck damnit!


All times are GMT -5. The time now is 11:20 AM.


© 2024 MH Sub I, LLC dba Internet Brands