new problem help!!! tuners please look(first post>
okk new problem. got the car started!!!! ;D but then when i cut it off it wont restart. so for the past 2 dats ive ben trying to figure out y it wont start. ive
checked all fuses and wires. then my friend says lets reburn u another chip but a completly different map. so we burn a d16 map. put it in hte car and it starts first try. drive around hte block real quik and its still got a checksum but atleast its running rite????!!!?? WRONG as soon as if iis cut off wont crank again. so i got burn another map. now it acts like it wants to crank but doesnt. wtf huh wtf. any ideas anyone also i need a obd2a to obd1 conversion harness for the low low.lol. new used i dont care. |
Re: blah i searched even on google
what year is the swap and what do the plugs look like,how many wires are on the plugs?
|
Re: blah i searched even on google
its a ---- i dotn know wat year motor it is but i have already done the obd2a to obd1 distributor harness wiring ----.
out of the 8 plugs 7 have 2 wires. i has one wire. it goes like so red yellow/ green black green black/ yellow black with silver dots(i guess thta wat u would call them)/ green green yellow<---one wire one blue black/ black yellow black/ blaack blue green silver/ black silver and the one one the bottom of tranny is green black/ green black its seems that a few of them are prety mcuht the same looking plug. its make me so ill lol |
Re: blah i searched even on google
i cant find a wiring diagram online... but..... go to the local auto parts store and pick up a helms manual.. they have wiring diagrams in the back that will tell you what each one of those is.. it will help you all the time.. so get it.
|
Re: blah i searched even on google
holy ---- i forgot about that. duh flame on. lol
got one sittin at the house. blickity blah \ well i checked the one i have dl'd on my laptop and it shows all the diagrams just no colors. ok kinda got it figured out kinda. i gives the connectors color and how many wires. lol. so i guess ima just anrrow them now.lol. also if someone just so happens to know where something else is please hit me up. it will make life much easier.lol |
Re: blah i searched even on google
ok so after some eye strainin i got some plugs that im eye'in as the ones.
if anyone knows the color of these wires connected to these plugs please chime in. also as a side note car used to be auto befor i got it and had a d16y8 in it so some of the plugs i dont think i will be using as in the vtec pressure switch and any of the auto ----. not sure if there the ones but hell its worth a try. so i need colors on back up light switch main shaft speed sensor ect sensor engine coolant temp switch lock up control soleniod calve knock sensor iac valve shift control egr control solenoid valve linear soleniod evap purge control solenoid valve iat sensor power steering pressure switch that should do it. thanks for hte help in advance |
Re: blah i searched even on google
is the motor a b18a1 or b1? that will help alot i think the back up lights are green and yellow they or on the front of the tranny
|
Re: blah i searched even on google
b18a1 i think.. ---- i will check when i get home tonite.
the harness is a 96 ek coupe. its a dx model but i know or am sure that the harness has ben changed to at least an ex model harness cus it once had a gsr swap then a d16y8 so i dont know. i just wanna get rid of these extra plugs. now that i think about it i know the sensors taht are on the auto dont matter anymore. lol. ------ ---- im thinkin to damn hard. |
Re: blah i searched even on google
i pretty sure that you going to have to extend some wires and change some plugs out, there is one on the back of the blck that just has 2 prongs sticking out thats you fanswitch if you got a b18a1, and obviously thats a 2 wire plug i for got to hook that one up for about 2 days on my swap.
|
Re: blah i searched even on google
okk new problem. got the car started!!!! ;D but then when i cut it off it wont restart. so for the past 2 dats ive ben trying to figure out y it wont start. ive
checked all fuses and wires. then my friend says lets reburn u another chip but a completly different map. so we burn a d16 map. put it in hte car and it starts first try. drive around hte block real quik and its still got a checksum but atleast its running rite????!!!?? WRONG as soon as if iis cut off wont crank again. so i got burn another map. now it acts like it wants to crank but doesnt. wtf huh wtf. any ideas anyone |
Re: new problem help!!! tuners please look(first post>
also will the main relay cause problems like this.
reason i ask is just the fuel stopped priming. and the relay no longer clicks on and ----. im lost to be honest. it wont crank for ---- and now it wont prime fuel so there is no point in trying to crank it.. so story goes as so car would start easy 4 days ago. i did nothing more than rev it a few times at the throttle body to make sure it would rev. 3 days ago i drove it around the block came home shut it off and it wouldnt crank. 2 days ago made a new base map and it crunk rite up bet then it wouldnt crank again till i burned a base map. yesterday. drained the gas cuz it was a year old put in 5 gallons of 93 and primed it out. really did bother with trying to crank it cuz it was 2 in the mornin.lol. today put a new base mape in to show a friend. it cranks i cut it off to show how it isnt gonna start again. and it didnt. lol. now no matter wat i do it doesnt crank and the fuel just stopped primming. wtf is going on. |
Re: new problem help!!! tuners please look(first post>
come on i know someone knowsnomthing. oh well. gonna try a main realy tommorow and see if it works. i so hope it does.
|
Re: new problem help!!! tuners please look(first post>
ok so after i got off last nite i went and fucked with a it for a minute and hte bitch started priming again. ima go over the grounds again and see if i can get anything outta that.
anyone else got any ideas |
All times are GMT -5. The time now is 12:10 PM. |
© 2024 MH Sub I, LLC dba Internet Brands