need some help with codes
ok im getting codes 14, 20, and 22
14 IAC (EACV) - idle air control valve 20 Electrical load detector 22 VTEC pressure valve the only one im worried about is 20... would that be like my alt going bad or something?? i dont understand why im haveing these ------- problems with my car at idle is pig rich, 10 and below on my wideband, and it breaks up past 3K with afr's past 15 could any of these codes be putting the ecu into limp mode or something and make tuneing basicly impossible untill there fixed? or do i have some other problem? i just got a chipped P28 to test if my PO6 was bad and im haveing the same problems if anyone has any ideas please let me know, i really want this thing fixed instead of haveing to sell it because i need a DD badly right now |
Re: need some help with codes
i believe the ELD is in the pcm :-\
|
Re: need some help with codes
wtf is a pcm....
|
Re: need some help with codes
Originally Posted by JDMFantasy2K
i believe the ELD is in the pcm :-\
Just download a repair manual, it sounds like you have some reading to do to troubleshoot those DTCs. |
Re: need some help with codes
i wish people would stop ------- abbriviateing
what exactly is the ELD for? is it for the chargeing system or something else |
Re: need some help with codes
Originally Posted by Anubis_4_99
i wish people would stop ------- abbriviateing
what exactly is the ELD for? is it for the chargeing system or something else |
Re: need some help with codes
i know what the ------- ELD is asswipe, PCM is one i didnt get, and DTC's is another
get the ---- out of here and shove a ------- pineapple up your ass you prick |
Re: need some help with codes
Originally Posted by Anubis_4_99
i know what the ------- ELD is asswipe, PCM is one i didnt get, and DTC's is another
get the ---- out of here and shove a ------- pineapple up your ass you prick |
Re: need some help with codes
shove the manual up your ass newbie, i have one, im tired of looking through the ------- thing
i didnt ask where it was, i asked what system its for, so unless you have something usefull to add then shut the ---- up i may not know some simple ----, but i built my ------- motor from oil pan to valve cover, im not asking for critisisam, im asking for help to get my car running |
Re: need some help with codes
dtc= diagnostic trouble code
pcm= powertrain control module, ecu, whatever |
Re: need some help with codes
iacv plug switched with iat plug
22 check ground 20 is a result of a shitty ground |
Re: need some help with codes
Originally Posted by chris
iacv plug switched with iat plug
22 check ground 20 is a result of a shitty ground im fairly certin i dont have the plugs switched but i'll try it out, and i'll go over my grounds again tomorrow as well i've had the 14 and 22 since i put the motor back in the car, but 20 is new, just came about the day i posted this topic.. could a ground have wiggled loose? |
Re: need some help with codes
Originally Posted by Anubis_4_99
bam thank you! this is the kinda info i was looking for
im fairly certin i dont have the plugs switched but i'll try it out, and i'll go over my grounds again tomorrow as well i've had the 14 and 22 since i put the motor back in the car, but 20 is new, just came about the day i posted this topic.. could a ground have wiggled loose? code 2o comes when you have multiple codes and ground problems code 22 is usually 99 percent of the time a result of a bad ground on the pressure switch check your wiring and your golden |
All times are GMT -5. The time now is 10:05 PM. |
© 2024 MH Sub I, LLC dba Internet Brands