DOHCZCEF9

I'm picking up my new B16 today after blowing up0 my turbo ZC motor and I'm thinking of going with a OBD1 Cable trans B16. Now I need to know if anyone exacatly what I need to do beside taking out the resisotr box to convert to OBD1. I need to know if anyone has a link to a site that gives all the instrcutions, I'm not affraid of wiring since I've done many motor swaps and I had to re-wire my 91' HB from DPFI to MPFI but I've never convert from Pre-OBD to OBD1. If I can't find what I need in time I'll most likely just buy the OBD1 B16 and just switch out the Dizzy , injectors , and ECU to run the motor as a OBD0 motor. The company where I live that I'm buying the motor from the owner said he'd swicth the Dizzy and ECU ffrom the OBD1 to a OBD0 if I buy the OBD1 B16 and I can just use my old ZC injectors since they're 2500cc and OBD0 Injectors that require the box .Anyone that give my any info I Thanks you in advance. I've gone to alot of forums and site and no one has anything or they tell me it's not hard but don't know what to do. Thanks.

88crxSi

make sure you get a cable tranny.. the b16a that is obd1 is from a 92+ car which uses hydro tranny so be SURE.

what else comes w/ the swap? harness? ecu? axles? int shaft? linkage? try to get atleast a harness that would make it easier im sure.

themadhatter

here man this is the best i can do hope it helps http://www.geocities.com/chipman_13/...onversion.html