need help with obd2 and obd1 problems
 

i have a b18b. the block is obd2 and the head is obd1 and im using an obd1 harness. everything is connected but the alternator. i reused the alternator bracket from my old a1 block..the problem is i got 2 diff alternator belts for an obd1 b18b and an obd2 b18b and neither fit. they are both a tad bit short. so how would i get an alternator belt for it?

Re: need help with obd2 and obd1 problems
 

measure it with string, or go to the store with the one that is too short and get one slightly bigger

Re: need help with obd2 and obd1 problems
 

yup and if you get a belt with one to many ribs bust out the dikes and get rid of has many ribs has need to be reomved for the crank pulley

Re: need help with obd2 and obd1 problems
 

yeh i figured id have to do that..thanks

also:
im using my cx harness for my b18b swap. how do i wire the oxygen sensor? its still a one wire o2 sensor..do i jus styay with the one wire? or do i convert it to the 4 or w.e it is

Re: need help with obd2 and obd1 problems