it's hard to find parts for the zc's and im tryin to rebuild mine if anyone can tell me what parts come from what motor (like how a timing belt is from the 89 prelude) this is what i need:
headbolts (i want arp's)
main bearings (standard size)
oil pump (oem is fine)
timing belt tensioner

thanks for any help

 

anyone??

 

ask julio, he rebuilt his DOHC ZC himself years ago.

 

thanks murdy

 

BOTH THE A6 and the A1 have the same size rod and main bearing sizes so either one will fit. the Pistons are them same as well and by that i mean bore sizes and a=what have you . the A6 piston is flat and teh PM7 piston is domed.

thrust washers are the same aswell. the onlything that is differetn is the water pump. thats from a 88-91 civic not from a 88-89 teg.

the oil pump is also 88-91 civic as the 89 teg ones have different size snouts and what have you.

im in the process of rebuilding 2 motors so im goin to be in the garage for the next week or so.

building a bottom end is not difficlut ..ust read the manul and you should be fine.

Julio

 

For everything on the head you use 88-89 DOHC Integra parts. For the bottom end its the same as 88-91 D16 SOHC. The timing belt is from the 88 DOHC Prelude. The upper radiator hose is from an Accord but I can't remember what year.

 

this might help you out http://www.geocities.com/civiczc/zcinfo.html

 

Hey at that link I found this:
Head Gasket:
1988 Prelude; 12251-PM7-003

I used 88-89 Teg with no problems. Is that correct?

 

i also got an 88-89 teg gasket. im also wondering since i havent put the motor in yet, i compared the dohc zc gaket with the intgera one and they were identical.