ive checked everything that i think i need to i went and looked into the stuff that is stickied and nothing the main relay is fine,i got fuel but no spark. ive put in two other distributrs that i know are good and nthing i also put two other ecu in there and nothing. checked all the grounds and nothing all that keeps happenning is that it will turn over but no start. the battery keeps dying but i think that it is from turning the key any help please let me know. the swap is a b16a into a 88 crx si thanks

 

Wiring y0.

 

i went thru everything wiring and all cleaned all the grounds. im getting a 16 code right now but im getting gas and i got power to all the injectors i check all four of them and they all have power in all eight of the wires that connect to the injectors

 

also timing is dead nuts on

 

Could be a bad ecu. Try that.

 

doubtful.. since you already put in different dizzy's the only thing left is distributor wiring or wiring somewhere.. check the wires at the ecu if you have spliced them at all.. i had a code 4 once and bought a new dizzy and it threw the same code and i was pissed but i looked at the ecu and found a broke wire.. maybe you will get lucky and find the same..