HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Hybrid/Tech (https://www.homemadeturbo.com/hybrid-tech-8/)
-   -   Need Help!! (https://www.homemadeturbo.com/hybrid-tech-8/need-help-64120/)

SiTurboD Jun 30, 2006 06:43 PM

Need Help!!
 
k so i swapped my trans and then the car didnt start. So after replacing the coil , cap , rotor and fuse for the fuel pump under the hood it started drove and was ok for most of the day.. until it started throwing code 5 (map sensor) later on the car was ------- up on my way home . the check engine light was flashing on and off. and i made a turn the car dies. I swapped the map today a still nothing .. then i checked that damn 15amp fuse onder the hood and it was blown again . so i changed it , started up still running like ass the check engine light was flashing and the i could hear a relay under the hook clicking like crazy on and off . and its giving me a code 22.. when i dont have vtec. but im gonna check out the the fuel pump/ fuse, and other misc crap with the multi meter maybe a relay is crapin out

z1guy Jun 30, 2006 09:09 PM

Re: Need Help!!
 
a little background on the swap would help. first thing i would check is TPS and MAP connectors, alot of people get them swapped when swapping motors since the plugs are the same on. then i would check all the grounds on the engine and the frame, and check the ECU, if you swapped it w/ the swap it could be bad.

Zeniceguycrx Jun 30, 2006 09:16 PM

Re: Need Help!!
 
bro that sounds like a mad ground problem

normaly that little ground on the tranny, your car with not enuff ground is like u being realy drunk

SiTurboD Jun 30, 2006 11:35 PM

Re: Need Help!!
 
well i was going to use a friends multimeter but the larger 10a fuse in it was previously blown and radio shack only carries them up to like a 6.3v . anyways i swapped my fuel pressure regulator with another one i had. B4 i knew the fuse in the multi meter was blown i had the prongs where the 15amp fi/ecm fuse belongs and when i did it was priming and i heard the clicking . I have my map and tps in the right spot . the maps been tapped b4 from tuning. Now with the codes... its not throwing the 5 anymore and put my old map back on .. its not throwing 22 anymore and the only one its throwing is a 14 .. IACV . well it is a y8 mani on a y7 now and i did swap the plug correctly.. ylw/bk and the blu/gry disguarding the orange. but ive had the iacv off b4 i put the mani on and it was all gunked up. im gonna try soakin in some carb cleaner or somthing. tomorrow. otherwise ill shop around for a new one. because im pretty possitive i have it hooked up correctly .. my idle doesnt hope or anything my throttles a lil sticky but thats it. ALso ive been driving the car around the neighborhood and its not shaking or bogging down at all now..

SiTurboD Jun 30, 2006 11:51 PM

Re: Need Help!!
 
also gonna check on those grounds tomorrow ... clean them all up check if their tight


All times are GMT -5. The time now is 09:28 AM.


© 2026 MH Sub I, LLC dba Internet Brands