I have an 89 civic hatch with the 1.5 i dont know what its called.How hard and what stuff would i need to change it over to multiport fuel injected, i have a motor out of a 95 so i have most of the parts. Thanks

 

well the most common items to use are...intake manifold/throttle body,dist.,and ecu from a 88-91crxSI but the best thing to do is to do a search at yahoo or something and look for the info there its a good bit to type or do a search about this and u will find where people have discused this before, and have put up links to pages that will give u the info

 

what motor out of a 95? might be more beneficial to drop that entire motor in.

 

I have a 95 dx motor but the block is toast my friend had a turbo on it and blew the block to hell. but i have the rest of the parts.

 

you "could" put the entire top end of the motor on yours but that will require you to change to obd1. Its not the hardest thing in the world if you are comfortable w/ wiring changes to your harness/plugs.

I even think that Hasport makes an obd0 - obd1 conversion harness that lets you plug it all in..

check their website out.
http://www.hasport.com/

 

Here is a good website that has the instructions on DPFI to MPFI swap:

http://www.4thgenerationcivic.com/

just go to the How-To section and select performance. You will see a link there for the swap.

 

dont forget that site is assuming your going to be swapping and 88-91 Si top end!!